Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
81740
1.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY
Connect the connector.
Engage the 2 guides.
Engage the 2 claws to install the side turn signal light assembly.
2.INSTALL OUTER MIRROR HOLE COVER ASSEMBLY (w/o Panoramic View Monitor System)
3.INSTALL OUTER MIRROR HOLE COVER WITH SIDE TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
87945
4.INSTALL OUTER MIRROR COVER
87961
5.INSTALL OUTER MIRROR
6.PERFORM CALIBRATION (w/ Panoramic View Monitor System)