Home › Engine / Hybrid System › 2GR-FKS (COOLING) › RADIATOR › 2018.04–2021.02
RM33A0E _51 Engine / Hybrid System _065337 2GR-FKS COOLING _0326740 RADIATOR A

2GR-FKS COOLING  RADIATOR  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during radiator assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Headlight ECU sub-assembly LH
·

Synchronize the vehicle information

·

Perform headlight ECU sub-assembly LH initialization


Lighting System (EXT) (w/ Automatic Headlight Beam Level Control System) (Click here)
Front bumper assembly (w/ Panoramic View Monitor System) Front television camera view adjustment Panoramic View Monitor System (Click here)

PROCEDURE

Hide 53851M 1.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

Hide 53852K 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 4.DRAIN ENGINE COOLANT

Hide 52611 7.REMOVE FRONT BUMPER ENERGY ABSORBER

Hide 52131A 8.REMOVE FRONT BUMPER REINFORCEMENT

Hide 17750A 10.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 53253B 11.REMOVE UPPER RADIATOR MOUNTING BRACKET

a.
A415568

Disconnect the 2 horn connectors.


b.
A402031

Remove the 2 bolts, 2 nuts and 2 upper radiator mounting brackets.


Hide 16595B 12.REMOVE NO. 1 RADIATOR AIR GUIDE LH

a.
A408578C01
1.948,0.698 2.302,0.698 false 2.417,1.542 2.771,1.542 false 2.365,0.625 2.667,0.875 0.302,0.25 10 true *1 2.813,1.469 3.104,1.729 0.292,0.26 10 true *2
*1 No. 1 Radiator Air Guide LH
*2 Front Radiator Side Air Guide Plate LH


Remove the clip and disengage the claw.


b.

Disengage the guide to remove the No. 1 radiator air guide LH with the front radiator side air guide plate LH.


Hide 16593B 13.REMOVE NO. 1 RADIATOR AIR GUIDE RH

a.
A408577

Remove the clip and disengage the claw.


b.

Disengage the guide to remove the No. 1 radiator air guide RH.


Hide 53205 14.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.
A408331C01
0.052,0.104 0.385,0.354 0.333,0.25 12 true *A 0.031,2.479 0.385,2.74 0.354,0.26 12 true *B
*A for LHD
*B for RHD


Disengage the clamp to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.


b.
A407193

Remove the 4 bolts and upper radiator support sub-assembly.


Hide 16281F 15.DISCONNECT NO. 5 WATER BY-PASS HOSE

a.
A407366C01
1.073,0.802 1.604,0.25 1.604,0.25 2.156,0.781 false 2.448,0.146 2.677,0.146 2.677,0.146 2.875,0.792 false 1.51,0.042 1.802,0.25 0.292,0.208 10 false *1 2.271,0.073 2.552,0.292 0.281,0.219 10 false *2
*1 Hose Clamp (A)
*2 Hose Clamp (B)


Disengage the 4 clamps to disconnect the No. 5 water by-pass hose and No. 6 water by-pass hose from the hose clamp (A).


b.

Disengage the 2 clamps to remove the hose clamp (B) from the No. 5 water by-pass hose and No. 6 water by-pass hose.


c.
A407195

Slide the clip and disconnect the No. 5 water by-pass hose from the radiator assembly.


Hide 16571C 16.DISCONNECT NO. 1 RADIATOR HOSE

a.
A407196

Disengage the clamp and disconnect the No. 1 radiator hose from the fan with motor assembly.


b.

Slide the clip and disconnect the No. 1 radiator hose from the radiator assembly.


Hide 16572D 17.DISCONNECT NO. 2 RADIATOR HOSE

a.
A407197

Slide the clip and disconnect the No. 2 radiator hose from the radiator assembly.


Hide 16400 18.REMOVE RADIATOR ASSEMBLY

a.
A407198

Disengage the 2 claws.


b.

Disengage the 2 guides to separate the cooler condenser assembly from the radiator assembly.

NOTICE:

Make sure not to damage the cooler condenser assembly when separating the cooler condenser assembly.



c.

Disconnect the cooling fan motor connector. (for 330 W Cooling Fan Motor)

i.
A407199C01
1.156,0.604 1.385,0.25 1.385,0.25 1.583,0.25 false 1.646,0.156 1.958,0.313 0.313,0.156 10 false *a
*a Lock Lever


Disengage the claw and raise the lock lever to disconnect the cooling fan motor connector as shown in the illustration.

NOTICE:

After disconnecting the cooling fan motor connector, make sure that dirt, water or other foreign matter does not contact the connecting parts of the cooling fan motor connector.



ii.

Disengage the wire harness clamp.



d.

Disconnect the cooling fan motor connector. (for 500 W Cooling Fan Motor)

i.
A407201

Disconnect the cooling fan motor connector.


ii.

Disengage the wire harness clamp.


iii.
A407202

Rotate the lever while pushing the lock, and disconnect the cooling fan motor connector.

NOTICE:

After disconnecting the cooling fan motor connector, make sure that dirt, water or other foreign matter does not contact the connecting parts of the cooling fan motor connector.



iv.

Disengage the wire harness clamp.



e.

Remove the radiator assembly with the fan with motor assembly from the vehicle body.

NOTICE:

Do not apply excessive force to the cooler condenser assembly or pipe when removing the radiator assembly with the fan with motor assembly.



f.
A407204

Disengage the 2 claws.


g.

Disengage the 2 guides to remove the fan with motor assembly from the radiator assembly.

NOTICE:

Do not damage the radiator assembly when removing the fan with motor assembly.



Hide 16523A 19.REMOVE RADIATOR SUPPORT CUSHION

a.

Remove the 2 radiator support cushions from the radiator assembly.


Hide 16535 20.REMOVE LOWER RADIATOR SUPPORT

a.

Remove the 2 lower radiator supports from the radiator assembly.