Home › Vehicle Exterior › WIPER / WASHER › WASHER LEVEL WARNING SWITCH › 2018.04–2021.02
RM33A0E _59 Vehicle Exterior _065394 WIPER / WASHER _0320463 WASHER LEVEL WARNING SWITCH A

WIPER / WASHER  WASHER LEVEL WARNING SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during level warning switch assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link
Front bumper assembly (w/ Panoramic View Monitor System) Front television camera view adjustment Panoramic View Monitor System (Click here)

PROCEDURE

Hide 1.REMOVE FRONT BUMPER ASSEMBLY

Hide 85397 3.REMOVE LEVEL WARNING SWITCH ASSEMBLY

a.
E364831C01
0,0 0,0 false
V113147

Remove in this Direction


Disconnect the connector.


b.

Remove the level warning switch assembly as shown in the illustration.