89413T
1.INSTALL TRANSMISSION REVOLUTION SENSOR (NSS)
Coat a new O-ring with Toyota Genuine CVT fluid FE and install it to the transmission revolution sensor (NSS).
Ensure that the O-ring is not twisted.
Install the transmission revolution sensor (NSS) to the transaxle case sub-assembly with the bolt.
Be careful not to damage the O-ring.
Connect the transmission revolution sensor (NSS) connector.
89535B
2.INSTALL TCM
Click hereDrivetrain>K120 (CVT)>TCM>INSTALLATION
3.INSPECT FOR FLUID LEAKS
4.CHECK DATA LIST