Home › Engine / Hybrid System › M20A-FKS (COOLING) › RADIATOR › from 2021.02
RM33A0E _51 Engine / Hybrid System _098633 M20A-FKS COOLING _0461858 RADIATOR A

M20A-FKS COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 16535 1.INSTALL LOWER RADIATOR SUPPORT

a.

Install the 2 lower radiator supports to the radiator assembly.


Hide 16523A 2.INSTALL RADIATOR SUPPORT CUSHION

a.

Install the 2 radiator support cushions to the radiator assembly.


Hide 16400 3.INSTALL RADIATOR ASSEMBLY

a.

Engage the 2 guides.


b.

Engage the 2 claws to install the fan with motor assembly to the radiator assembly.

NOTICE:

Do not damage the radiator assembly when installing the fan with motor assembly.



c.

Install the radiator assembly with the fan with motor assembly to the vehicle body.

NOTICE:

Do not apply excessive force to the cooler condenser assembly or pipe when installing the radiator assembly with the fan with motor assembly.



d.
A443835C01
1.042,0.479 1.198,0.229 1.198,0.229 1.375,0.229 false 1.417,0.135 1.729,0.292 0.313,0.156 10 false *a
*a Lock Lever


Engage the wire harness clamp.


e.

Connect the cooling fan motor connector and push down the lock lever to engage the claw as shown in the illustration.

NOTICE:
·

When connecting the cooling fan motor connector, make sure that the connecting parts of the cooling fan motor connector are free of dirt, water or other foreign matter.

·

Be sure to securely connect the cooling fan motor connector.




f.

Engage the 2 guides.


g.

Engage the 2 claws to install the cooler condenser assembly to the radiator assembly.

NOTICE:

Make sure not to damage the cooler condenser assembly when installing the radiator assembly.



Hide 16572D 4.CONNECT NO. 2 RADIATOR HOSE

a.

Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.


Hide 16571C 5.CONNECT NO. 1 RADIATOR HOSE

a.

Connect the No. 1 radiator hose to the radiator assembly and slide the clip to secure it.


b.

Engage the clamp to connect the No. 1 radiator hose to the fan with motor assembly.


Hide 16283D 6.CONNECT NO. 6 WATER BY-PASS HOSE

a.

Connect the No. 6 water by-pass hose to the radiator assembly.


Hide 16281F 7.CONNECT NO. 5 WATER BY-PASS HOSE

a.

Connect the No. 5 water by-pass hose to the radiator assembly and slide the clip to secure it.


Hide 53205 8.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.

Install the upper radiator support sub-assembly with the 4 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Engage the clamp to connect the hood lock control cable assembly to the upper radiator support sub-assembly.


Hide 16593B 9.INSTALL NO. 1 RADIATOR AIR GUIDE RH

a.

Engage the guide and claw.


b.

Install the No. 1 radiator air guide RH with the clip.


Hide 16595B 10.INSTALL NO. 1 RADIATOR AIR GUIDE LH

a.

Engage the guide and claw.


b.

Install the No. 1 radiator air guide LH with the front radiator side air guide plate LH with the clip.


Hide 53253B 11.INSTALL UPPER RADIATOR MOUNTING BRACKET

a.

Install the 2 upper radiator mounting brackets with the 2 bolts and 2 nuts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Connect the 2 horn connectors.


Hide 17750A 12.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 52131A 14.INSTALL FRONT BUMPER REINFORCEMENT

Hide 52611 15.INSTALL FRONT BUMPER ENERGY ABSORBER

Hide 18.ADD ENGINE COOLANT

Hide 51441 20.INSTALL NO. 1 ENGINE UNDER COVER

Hide 53852K 21.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Hide 53851M 22.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH