Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM › from 2021.02
RM33A0E _51 Engine / Hybrid System _065357 CRUISE CONTROL _0342029 ROAD SIGN ASSIST SYSTEM D

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  VEHICLE CONTROL HISTORY  


NOTICE:

Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again.


CHECK VEHICLE CONTROL HISTORY (ROAD SIGN ASSIST SYSTEM)


a.

Read the Vehicle Control History (RoB) according to the display on the GTS.

Body Electrical > Road Sign Assist > Utility
Tester Display
Vehicle Control History (RoB)
50005 431 55
Vehicle Control History (RoB)
Multi-information Display Code Tester Display Description Diagnostic Note
RSA Malfunction Visit Your Dealer X2000 Yaw Rate Sensor Malfunction The forward recognition camera received a yaw rate sensor malfunction signal from the skid control ECU (brake actuator assembly). Refer to How to Proceed with Troubleshooting in Vehicle Stability Control System.
(Click here)
RSA Malfunction Visit Your Dealer X2004 Speed Sensor Malfunction The forward recognition camera received a vehicle speed sensor malfunction signal from the skid control ECU (brake actuator assembly). Refer to How to Proceed with Troubleshooting in Vehicle Stability Control System.
(Click here)
- X2011 Front Recognition Camera System Software Not Programmed The forward recognition camera cannot store the vehicle information. Refer to How to Proceed with Troubleshooting in Front Camera System.
(Click here)
RSA Malfunction Visit Your Dealer X2012 Front Recognition Camera Malfunction The forward recognition camera detected an internal malfunction. Refer to How to Proceed with Troubleshooting in Front Camera System.
(Click here)
RSA Malfunction Visit Your Dealer X2013 Front Recognition Camera Optical Axis Misalignment Malfunction The forward recognition camera detected optical axis misalignment. Refer to DTC C1AA800 in Front Camera System
(Click here)
RSA Malfunction Visit Your Dealer X2014 Front Recognition Camera Optical Axis Not Adjusted Forward recognition camera optical axis adjustment has not been performed. If this Vehicle Control History code is output, perform forward recognition camera optical axis adjustment, clear the Vehicle Control History and then check that this code is not stored again.
HINT:

Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

One Time Recognition:(Click here)

Sequential Recognition:(Click here)

Driving Adjustment:(Click here)


- X2015 Front Recognition Camera Dirt System operation was temporarily suspended due to the forward recognition camera not being able to detect objects. Refer to Vehicle Control History code X2015 of Front Camera System.
(Click here)
- X2016 Front Recognition Camera Outside Guaranteed Operating Temperature System operation was temporarily suspended due to the forward recognition camera being excessively hot or cold. Refer to Vehicle Control History code X2016 of Front Camera System.
(Click here)
- X2017 Front Recognition Camera Outside Guaranteed Operating Voltage System operation was temporarily suspended due to forward recognition camera power source voltage being excessively high or low. Refer to Vehicle Control History code X2017 of Front Camera System.
(Click here)
RSA Malfunction Visit Your Dealer X201D Front Recognition Camera System Software Malfunction The forward recognition camera detected destination information malfunction. Refer to How to Proceed with Troubleshooting in Front Camera System.
(Click here)
- X2020 Front Radar Sensor Destination Malfunction The forward recognition camera received a destination information malfunction signal from the millimeter wave radar sensor assembly. Refer to How to Proceed with Troubleshooting in Front Radar Sensor System.
(Click here)
- X2021 Front Radar Sensor Malfunction The forward recognition camera received a malfunction signal from the millimeter wave radar sensor assembly. Refer to How to Proceed with Troubleshooting in Front Radar Sensor System.
(Click here)
- X2022 Front Radar Sensor Optical Axis Misalignment Malfunction The forward recognition camera received a beam axis misalignment malfunction signal from the millimeter wave radar sensor assembly. Perform millimeter wave radar sensor assembly beam axis adjustment.
HINT:

Beam axis alignment of the millimeter wave radar sensor assembly can be performed using either Triangle Target, Flat Surface Target or Driving Adjustment.

Triangle Target:(Click here)

Flat Surface Target:(Click here)

Driving Adjustment:(Click here)


- X2023 Front Radar Sensor Optical Axis Not Adjusted The forward recognition camera received a beam axis not adjusted signal from the millimeter wave radar sensor assembly. If this Vehicle Control History code is output, perform millimeter wave radar sensor assembly beam axis adjustment, clear the Vehicle Control History and then check that this code is not stored again.
HINT:

Beam axis alignment of the millimeter wave radar sensor assembly can be performed using either Triangle Target, Flat Surface Target or Driving Adjustment.

Triangle Target:(Click here)

Flat Surface Target:(Click here)

Driving Adjustment:(Click here)


- X2026 Front Radar Sensor Dirt The forward recognition camera received a dirty signal from the millimeter wave radar sensor assembly. Refer to How to Proceed with Troubleshooting in Front Radar Sensor System.
(Click here)
- X2027 Front Radar Sensor Outside Guaranteed Operating Temperature The forward recognition camera received a temperature malfunction signal from the millimeter wave radar sensor assembly. Refer to How to Proceed with Troubleshooting in Front Radar Sensor System.
(Click here)
- X2028 Front Radar Sensor Outside Guaranteed Operating Voltage The forward recognition camera received a voltage malfunction signal from the millimeter wave radar sensor assembly. Refer to How to Proceed with Troubleshooting in Front Radar Sensor System.
(Click here)
- X2076 Wiper Malfunction The forward recognition camera received a wiper system malfunction signal from the main body ECU (multiplex network body ECU). Refer to How to Proceed with Troubleshooting in Wiper and Washer System.
(Click here)
- X2077 Ambient Temperature Sensor Circuit The forward recognition camera received an ambient temperature sensor malfunction signal from the air conditioning amplifier assembly. Refer to How to Proceed with Troubleshooting in Air Conditioning System.
for Automatic Air Conditioning System:(Click here)
for Manual Air Conditioning System:(Click here)
RSA Malfunction Visit Your Dealer X2084 Meter Speed Tolerance Malfunction The forward recognition camera received a vehicle speed tolerance malfunction signal from the combination meter assembly. Refer to How to Proceed with Troubleshooting in Meter / Gauge System.
(Click here)



CLEAR VEHICLE CONTROL HISTORY (ROAD SIGN ASSIST SYSTEM)


NOTICE:

By performing this procedure, all stored Vehicle Control History will be cleared.


a.

According to the display on the GTS, clear the Vehicle Control History (RoB).

Body Electrical > Road Sign Assist > Utility
Tester Display
Vehicle Control History (RoB)
50005 431 55