Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › PANORAMIC MOON ROOF SYSTEM
RM33C0E _59 Vehicle Exterior _065468 SLIDING ROOF / CONVERTIBLE _0333641 PANORAMIC MOON ROOF SYSTEM C

SLIDING ROOF / CONVERTIBLE  PANORAMIC MOON ROOF SYSTEM  B2343  Position Initialization Incomplete  


DESCRIPTION

This DTC is stored when the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) has not been initialized.

Sliding Roof
DTC No. Detection Item DTC Detection Condition Trouble Area
B2343 Position Initialization Incomplete Sliding roof ECU (sliding roof drive gear assembly) has not been initialized. Sliding roof ECU (Sliding roof drive gear assembly)

Sliding Sunshade
DTC No. Detection Item DTC Detection Condition Trouble Area
B2343 Position Initialization Incomplete Roof sunshade ECU (sliding roof drive gear assembly) has not been initialized. Roof sunshade ECU (Sliding roof drive gear assembly)

CAUTION / NOTICE / HINT

NOTICE:
·

If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) must be initialized.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>INITIALIZATION

·

The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

·

DTC B2343 is stored in the sliding roof ECU (sliding roof drive gear assembly) and roof sunshade ECU (sliding roof drive gear assembly).



HINT:

If DTC B2342 and B2343 are output simultaneously, perform troubleshooting for DTC B2342 first.


PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Body Electrical > Sliding Roof > Clear DTCs
50002 147
Body Electrical > Sliding Sunshade > Clear DTCs
50002 370

b.

Check for DTCs.

Body Electrical > Sliding Roof > Trouble Codes
50001 147
Body Electrical > Sliding Sunshade > Trouble Codes
50001 370
OK:

DTC B2343 is not output.



Result:
Proceed to
OK
NG



OK

NG

2.CHECK DTC OUTPUT
2.CHECK DTC OUTPUT
a.

Check the parts from which this DTC has been output.


Result:
Result Proceed to
DTC output from sliding roof ECU (sliding roof drive gear assembly) A
DTC output from roof sunshade ECU (sliding roof drive gear assembly) B



A

3.INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)

B

6.INITIALIZE ROOF SUNSHADE ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
3.INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
a.

Check that the sliding roof ECU (sliding roof drive gear assembly) can be initialized.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>INITIALIZATION

OK:

Sliding roof ECU (sliding roof drive gear assembly) can be initialized.



Result:
Proceed to
OK
NG



OK

4.CHECK SLIDING ROOF OPERATION

NG

4.CHECK SLIDING ROOF OPERATION
a.

Check the sliding roof auto operation function.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>OPERATION CHECK

OK:

Auto operation function operates normally.



Result:
Proceed to
OK
NG



OK

5.CHECK DTC OUTPUT

NG

REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)

5.CHECK DTC OUTPUT
a.

Clear the DTCs.

Body Electrical > Sliding Roof > Clear DTCs
50002 147

b.

Check for DTCs.

Body Electrical > Sliding Roof > Trouble Codes
50001 147
OK:

DTC B2343 is not output.



Result:
Proceed to
OK
NG



OK

END (MALFUNCTION DUE TO INITIALIZATION FAILURE)

NG

6.INITIALIZE ROOF SUNSHADE ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
a.

Check that the roof sunshade ECU (sliding roof drive gear assembly) can be initialized.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>INITIALIZATION

OK:

Roof sunshade ECU (sliding roof drive gear assembly) can be initialized.



Result:
Proceed to
OK
NG



OK

7.CHECK ROOF SUNSHADE OPERATION

NG

REPLACE ROOF SUNSHADE ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)

7.CHECK ROOF SUNSHADE OPERATION
a.

Check the roof sunshade auto operation function.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>OPERATION CHECK

OK:

Auto operation function operates normally.



Result:
Proceed to
OK
NG



OK

8.CHECK DTC OUTPUT

NG

REPLACE ROOF SUNSHADE ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)

8.CHECK DTC OUTPUT
a.

Clear the DTCs.

Body Electrical > Sliding Sunshade > Clear DTCs
50002 370

b.

Check for DTCs.

Body Electrical > Sliding Sunshade > Trouble Codes
50001 370
OK:

DTC B2343 is not output.



Result:
Proceed to
OK
NG



OK

END (MALFUNCTION DUE TO INITIALIZATION FAILURE)

NG

REPLACE ROOF SUNSHADE ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)