Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › PANORAMIC MOON ROOF SYSTEM
RM33C0E _59 Vehicle Exterior _065468 SLIDING ROOF / CONVERTIBLE _0333641 PANORAMIC MOON ROOF SYSTEM J

SLIDING ROOF / CONVERTIBLE  PANORAMIC MOON ROOF SYSTEM  Remote Control System does not Operate  


DESCRIPTION

The main body ECU (multiplex network body ECU) receives remote control signals from the driver door key cylinder or wireless transmitter*. Then, the main body ECU (multiplex network body ECU) activates the power window motor and sends the remote control signals to the sliding roof ECU (sliding roof drive gear assembly) via LIN communication. The sliding roof ECU (sliding roof drive gear assembly) receives the signals and activates the sliding roof motor.

*: w/o Canister Pump Module


CAUTION / NOTICE / HINT

NOTICE:
·

The panoramic moon roof key-linked function and panoramic moon roof wireless transmitter-linked function are operative when the power window customize settings "Door Key P/W Up", "Door Key P/W Down", "P/W Down W/Transmit"and "P/W Down W/Transmit" are set to "ON" using the GTS. (The default setting of each is "OFF".) (w/o Canister Pump Module)

·

The panoramic moon roof key-linked function is operative when the power window customize settings "Door Key P/W Up" and "Door Key P/W Down" are set to "ON" using the GTS. (The default setting of each is "OFF".) (w/ Canister Pump Module)

·

If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) must be initialized.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>INITIALIZATION

·

The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

·

If a sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) DTC is output, perform troubleshooting for the DTC first.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>DTC CHECK / CLEAR

·

Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.



PROCEDURE

1.CHECK REMOTE CONTROL FUNCTION
a.

Check the key-linked and wireless transmitter-linked functions.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>PANORAMIC MOON ROOF SYSTEM>OPERATION CHECK


Result:
Result Proceed to
Both the power windows and sliding roof operate by the key-linked and wireless transmitter-linked* functions. A
The sliding roof does not operate by the key-linked or wireless transmitter-linked* function, but all of the power windows operate. B
Both the power windows and roof glass do not operate by the key-linked or wireless transmitter-linked* function. C


*: w/o Canister Pump Module



A

B

2.CHECK SLIDING ROOF OPERATION

C

2.CHECK SLIDING ROOF OPERATION
a.

Check the sliding roof operation.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>OPERATION CHECK

OK:

Sliding roof operates normally.



Result:
Proceed to
OK
NG



OK

3.REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)

NG

GO TO OTHER PROBLEM (Panoramic Moon Roof System does not Operate)

3.REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
a.

Replace the sliding roof ECU (sliding roof drive gear assembly).

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF HOUSING(for Moon Roof)>REMOVAL


Result:
Proceed to
NEXT



NEXT

4.INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
4.INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)
a.

Initialize the sliding roof ECU (sliding roof drive gear assembly).

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>INITIALIZATION


Result:
Proceed to
NEXT



NEXT

5.CHECK REMOTE CONTROL FUNCTION
5.CHECK REMOTE CONTROL FUNCTION
a.

Check the key-linked and wireless transmitter-linked* functions.

Click hereVehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>OPERATION CHECK

OK:

The key-linked and wireless transmitter-linked* functions operate normally.


*: w/o Canister Pump Module



Result:
Proceed to
OK
NG



OK

END (SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) WAS DEFECTIVE)

NG

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)