Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE COMPARTMENT DOOR OPENER SYSTEM › 2017.09–2019.02
RM33C0E _59 Vehicle Exterior _065469 DOOR / HATCH _0333675 LUGGAGE COMPARTMENT DOOR OPENER SYSTEM J

DOOR / HATCH  LUGGAGE COMPARTMENT DOOR OPENER SYSTEM  Luggage Compartment Door Opener does not Operate  


DESCRIPTION

The main body ECU (multiplex network body ECU) receives switch signals from the luggage compartment door opening switch assembly and operates the luggage compartment door lock assembly to open the luggage compartment door.

WIRING DIAGRAM

B479753E09
1.073,3.5 1.792,3.75 0.719,0.25 10 false W3 0.771,3.01 1.49,3.26 0.719,0.25 10 false 2 0.958,3.01 1.677,3.26 0.719,0.25 10 false E 1.083,3.667 2.5,4.125 1.417,0.458 10 false Luggage Compartment Door Lock Assembly 2.354,3.01 3.073,3.26 0.719,0.25 10 false D+ 2.448,2.552 3.167,2.802 0.719,0.25 10 false B 2.635,2.542 3.354,2.792 0.719,0.25 10 false 1 2.656,3.01 3.375,3.26 0.719,0.25 10 false 3 3.365,2.646 4.083,2.896 0.719,0.25 10 false 3D 3.375,1.917 4.094,2.167 0.719,0.25 10 false 3B 3.375,2.438 4.094,2.688 0.719,0.25 10 false 20 3.375,2.896 4.094,3.146 0.719,0.25 10 false 34 3.979,2.156 4.969,2.417 0.99,0.26 10 false DOOR BACK 3.979,0.74 5.021,0.938 1.042,0.198 10 false TRUNK OPN 4.865,0.469 5.76,1 0.896,0.531 10 false from Auxiliary Battery 5.573,1.281 6.292,1.531 0.719,0.25 10 false MB 5.646,1.073 6.365,1.323 0.719,0.25 10 false 6 5.594,2.073 6.313,2.323 0.719,0.25 10 false 11 5.646,2.885 6.365,3.135 0.719,0.25 10 false 4 5.938,1.281 6.656,1.531 0.719,0.25 10 false TR+ 5.938,2.281 6.656,2.531 0.719,0.25 10 false GND1 5.958,3.125 6.677,3.375 0.719,0.25 10 false LGCY 5.948,4.729 6.667,4.979 0.719,0.25 10 false TSW 3.906,3.781 5.521,4.271 1.615,0.49 10 false Instrument Panel Junction Block Assembly 5.573,4.708 6.292,4.958 0.719,0.25 10 false K53 5.635,4.51 6.354,4.76 0.719,0.25 10 false 4 2.323,5.073 3.042,5.323 0.719,0.25 10 false K42 2.323,5.229 4.083,5.646 1.76,0.417 10 false Luggage Compartment Door Opening Switch Assembly 1.427,6.573 2.146,6.823 0.719,0.25 10 false W1 1.438,6.729 2.604,7.135 1.167,0.406 10 false Luggage Electrical Key Switch 3.26,6.656 4.406,6.865 1.146,0.208 10 false R8 3.25,6.813 4.771,7.219 1.521,0.406 10 false Certification ECU (Smart Key ECU Assembly) 5.469,6.677 7.104,7.146 1.635,0.469 10 false Main Body ECU (Multiplex Network Body ECU) 3.417,1.708 4.135,1.958 0.719,0.25 10 false 3 3.365,3.104 4.083,3.354 0.719,0.25 10 false 3D 5.583,2.271 6.302,2.521 0.719,0.25 10 false MB 5.594,3.135 6.313,3.385 0.719,0.25 10 false MB 0.552,7.448 2.448,7.698 1.896,0.25 10 false : CAN Communication Line 3.177,6.146 3.896,6.396 0.719,0.25 10 false 26 2.5,4.625 3.219,4.875 0.719,0.25 10 false 2 2.5,6.125 3.219,6.375 0.719,0.25 10 false 2 3.594,4.615 4.313,4.865 0.719,0.25 10 false 5 1.406,6.115 2.125,6.365 0.719,0.25 10 false 1 3.427,6.25 4.146,6.5 0.719,0.25 10 false TSW5 0.208,4.51 1.177,4.771 0.969,0.26 10 false *1: for LHD 0.208,4.854 1.177,5.115 0.969,0.26 10 false *2: for RHD 2.229,6.146 2.948,6.396 0.719,0.25 10 false UL 1.594,6.146 2.313,6.396 0.719,0.25 10 false E

CAUTION / NOTICE / HINT

NOTICE:
·

The luggage compartment door opener system uses the CAN communication system. First, confirm that there is no malfunction in the CAN communication system. Refer to the How to Proceed with Troubleshooting procedure.

Click hereVehicle Exterior>DOOR / HATCH>LUGGAGE COMPARTMENT DOOR OPENER SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

·

Before replacing the main body ECU (multiplex network body ECU) or certification ECU (smart key ECU assembly), refer to Service Bulletin.



PROCEDURE

1.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check power door lock control system operation.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>OPERATION CHECK


OK:

Power door lock control system is normal.


Result:
Proceed to
OK
NG



OK

2.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

NG

2.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
a.

Check wireless door lock control system operation.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>OPERATION CHECK


OK:

Wireless door lock control system is normal.


Result:
Proceed to
OK
NG



OK

3.PERFORM ACTIVE TEST USING GTS (Trunk and Back-Door Open)

NG

3.PERFORM ACTIVE TEST USING GTS (Trunk and Back-Door Open)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Active Test.


e.

Perform the Active Test according to the display on the GTS.

Body Electrical > Main Body > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Trunk and Back-Door Open Operate luggage compartment door lock assembly latch release OFF or ON -
Body Electrical > Main Body > Active Test
Tester Display
Trunk and Back-Door Open
50004 123 3

OK:

Luggage compartment door lock assembly latch release motor operates normally.


Result:
Proceed to
OK
NG



OK

4.READ VALUE USING GTS (Trunk/BDoor Open SW, Luggage Courtesy SW)

NG

8.INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
4.READ VALUE USING GTS (Trunk/BDoor Open SW, Luggage Courtesy SW)
a.

Enter the following menus: Body Electrical / Main Body / Data List.


b.

Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Trunk/BDoor Open SW Luggage compartment door opening switch signal OFF or ON OFF: Luggage compartment door opening switch off
ON: Luggage compartment door opening switch on
-
Luggage Courtesy SW Luggage compartment door courtesy light switch signal OFF or ON OFF: Luggage compartment door courtesy light switch off
ON: Luggage compartment door courtesy light switch on
-
Body Electrical > Main Body > Data List
Tester Display
Trunk/BDoor Open SW
Luggage Courtesy SW
50003 123 93,53

OK:

The GTS display changes correctly in response to the ON/OFF operation of the luggage compartment door opening switch or luggage compartment door courtesy light switch.


Result:
Result Proceed to
OK A
NG (Trunk/BDoor Open SW) B
NG (Luggage Courtesy SW) C



A

5.READ VALUE USING GTS (Tr/B-Door Unlock SW)

B

6.INSPECT LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY

C

5.READ VALUE USING GTS (Tr/B-Door Unlock SW)
a.

Enter the following menus: Body Electrical / Entry&Start / Data List.


b.

Read the Data List according to the display on the GTS.

Body Electrical > Entry&Start > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Tr/B-Door Unlock SW Luggage electrical key switch OFF or ON OFF: Luggage electrical key switch not pressed
ON: Luggage electrical key switch pressed
When this item is abnormal, there is a malfunction in the luggage electrical key switch or related parts.

OK:

The GTS display changes correctly in response to the operation of the luggage electrical key switch.


Result:
Proceed to
OK
NG



OK

END (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) WAS DEFECTIVE)

NG

6.INSPECT LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY
a.

Remove the luggage compartment door opening switch assembly.

Click hereVehicle Exterior>DOOR / HATCH>LUGGAGE COMPARTMENT DOOR OPENER INNER SWITCH>REMOVAL


b.

Inspect the luggage compartment door opening switch assembly.

Click hereVehicle Exterior>DOOR / HATCH>LUGGAGE COMPARTMENT DOOR OPENER INNER SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

7.CHECK HARNESS AND CONNECTOR (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) - LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY AND BODY GROUND)

NG

REPLACE LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY

7.CHECK HARNESS AND CONNECTOR (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) - LUGGAGE COMPARTMENT DOOR OPENING SWITCH ASSEMBLY AND BODY GROUND)
a.

Disconnect the K53 main body ECU (multiplex network body ECU) connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K53-4 (TSW) - K42-5 Always Below 1 Ω
K42-2 - Body ground Always Below 1 Ω
K53-4 (TSW) or K42-5 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

8.INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
a.

Remove the luggage compartment door lock assembly.

Click hereVehicle Interior>DOOR LOCK>LUGGAGE COMPARTMENT DOOR LOCK>REMOVAL


b.

Inspect the luggage compartment door lock assembly.

Click hereVehicle Interior>DOOR LOCK>LUGGAGE COMPARTMENT DOOR LOCK>INSPECTION


Result:
Proceed to
OK
NG



OK

9.CHECK HARNESS AND CONNECTOR (LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY - INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND BODY GROUND)

NG

REPLACE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

9.CHECK HARNESS AND CONNECTOR (LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY - INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND BODY GROUND)
a.

Disconnect the 3D instrument panel junction block assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
W3-3 (D+) - 3D-34 Always Below 1 Ω
W3-1 (B) - 3D-20 Always Below 1 Ω
W3-2 (E) - Body ground Always Below 1 Ω
W3-3 (D+) or 3D-34 - Body ground Always 10 kΩ or higher
W3-1 (B) or 3D-20 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

10.CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

10.CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
a.

Temporarily replace the instrument panel junction block assembly with a new or known good one.

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL


b.

Check that the luggage door opener system is normal.


Result:
Proceed to
OK
NG



OK

END (INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WAS DEFECTIVE)

NG

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)