Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM MAIN SWITCH › from 2017.12
RM33C0E _59 Vehicle Exterior _065472 LIGHTING (EXT) _0330505 AUTOMATIC HIGH BEAM MAIN SWITCH A

LIGHTING (EXT)  AUTOMATIC HIGH BEAM MAIN SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RHD side and LHD side.

·

The following procedure is for the LHD side.



PROCEDURE

Hide 84153 1.INSTALL AUTO HIGH BEAM SWITCH

a.

for LHD:

i.
E365642C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 claws to install the auto high beam switch as shown in the illustration.



b.

for RHD:

i.
E371333C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 claws to install the auto high beam switch as shown in the illustration.



Hide 55302D 2.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

Hide 55302D 3.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/ Driver Side Knee Airbag)

Hide 53601 4.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

Hide 55436B 5.INSTALL NO. 2 METER HOOD CLUSTER

Hide 55606 6.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

Hide 55606 7.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

Hide 55318C 8.INSTALL INSTRUMENT SIDE PANEL LH

Hide 62312B 9.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62112A 10.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

Hide 67914 11.INSTALL FRONT DOOR SCUFF PLATE LH

Hide 55434B 12.INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (w/o Driver Side Knee Airbag)

Hide 55435B 13.INSTALL NO. 1 METER HOOD CLUSTER (w/o Driver Side Knee Airbag)