1.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
When installing a new instrument panel safety pad sub-assembly:
Immediately before installing the instrument panel safety pad sub-assembly, twist and cut off the portion as shown in the illustration.
Engage the 4 guides to temporarily install the instrument panel safety pad sub-assembly as shown in the illustration.
|
Install in this Direction | - | - |
Do not damage the instrument panel safety pad sub-assembly.
Do not allow the wire harnesses to interfere with the surrounding parts.
Install the instrument panel safety pad sub-assembly with the 4 bolts <B>, 2 bolts <A> and nut <F>.
| *a | Bolt <A> | *b | Bolt <B> |
| *c | Clip | *d | Nut <F> |
Install the 2 clips.
Engage each clamp.
| *A | w/ Digital Audio Broadcasting Antenna or Television Antenna | *B | w/ Ion Generator |
| *C | w/ Headup Display | - | - |
Connect each connector.
|
Install in this Direction |
Engage the 2 claws to connect the cooler (room temp. sensor) thermistor as shown in the illustration.
82149A
2.CONNECT NO. 5 INSTRUMENT PANEL WIRE (w/o Occupant Classification System)
82149A
3.CONNECT NO. 5 INSTRUMENT PANEL WIRE (w/ Occupant Classification System)
55650
4.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
|
Install in this Direction |
Engage the 2 clips and 2 claws to install the No. 1 instrument panel register assembly as shown in the illustration.
55011A
5.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
|
Install in this Direction |
Engage the 4 clips to install the No. 1 instrument panel garnish sub-assembly as shown in the illustration.
86160P
6.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)
Use the same procedure as for the LH side.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSTALLATION
55473B
7.INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL
|
Install in this Direction |
Engage the 2 guides as shown in the illustration.
|
Install in this Direction |
Engage the 2 clips to install the No. 2 instrument panel speaker panel as shown in the illustration.
86160P
8.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)
55472C
9.INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL
|
Install in this Direction |
Engage the 2 guides as shown in the illustration.
|
Install in this Direction |
Engage the 2 clips to install the No. 1 instrument panel speaker panel as shown in the illustration.
55303B
10.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Passenger Side Knee Airbag)
Connect the connector.
|
Install in this Direction |
Engage the 4 claws as shown in the illustration.
Install the 2 bolts <D>.
Install the lower instrument panel sub-assembly with the 3 screws <C>.
55303B
11.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/ Passenger Side Knee Airbag)
Connect the connector.
|
Install in this Direction |
Engage the 4 claws as shown in the illustration.
Install the lower instrument panel sub-assembly with the 5 screws <C>.
73990
12.INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)
55607
13.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Connect the connector.
Engage the clamp.
|
Install in this Direction |
Engage the 2 guides as shown in the illustration.
|
Install in this Direction |
Engage the 4 claws to install the No. 2 instrument panel under cover sub-assembly as shown in the illustration.
55317A
14.INSTALL INSTRUMENT SIDE PANEL RH
|
Install in this Direction |
Engage the 3 guides as shown in the illustration.
|
Install in this Direction |
Engage the 4 clips and 2 claws to install the instrument side panel RH as shown in the illustration.
62211
15.INSTALL FRONT PILLAR GARNISH RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
62311B
16.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
62111A
17.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
67913
18.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
19.INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)
Connect the connector.
Install the radio tuner opening cover with bracket with the 4 bolts <B>.
55420A
20.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Radio Receiver)
Connect the connector.
Engage the 5 clips as shown in the illustration.
|
Install in this Direction | - | - |
Engage the 4 clips in the order shown in the illustration to install the center instrument cluster finish panel assembly.
|
Install in this Direction | - | - |
55423B
21.INSTALL INSTRUMENT CLUSTER FINISH PANEL COVER (w/o Radio Receiver)
|
Install in this Direction |
Engage the 4 clips to install the instrument cluster finish panel cover as shown in the illustration.
22.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 7 Inch Display)
23.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 8 Inch Display)
55900
24.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (except 8 Inch Display)
55670
25.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
Connect the connector.
Engage the 11 clips to install the No. 3 instrument panel register assembly as shown in the illustration.
|
Install in this Direction | - | - |
55480D
26.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
Connect the connector.
|
Install in this Direction |
Engage the 5 clips to install the lower instrument panel finish panel assembly as shown in the illustration.
83100
27.INSTALL COMBINATION METER ASSEMBLY
55410C
28.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Connect the connector.
|
Install in this Direction |
Engage the 2 guides and 4 clips to install the instrument cluster finish panel assembly as shown in the illustration.
Install the 2 clips.
73900
29.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)
55302D
30.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)
Connect each connector.
Engage the clamp.
|
Install in this Direction |
Engage the 8 clips to install the No. 1 instrument panel sub-assembly as shown in the illustration.
55302D
31.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/ Driver Side Knee Airbag)
Connect each connector.
Engage the clamp.
|
Install in this Direction |
Engage the 6 clips to install the No. 1 instrument panel sub-assembly as shown in the illustration.
53601
32.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.
55436B
33.INSTALL NO. 2 METER HOOD CLUSTER
|
Install in this Direction |
Engage the 3 clips to install the No. 2 meter hood cluster as shown in the illustration.
55606
34.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
Engage the 2 claws to connect the DLC3 connector.
Engage the 2 clamps.
Connect the connector.
|
Install in this Direction |
Engage the guide as shown in the illustration.
|
Install in this Direction |
Engage the 3 claws as shown in the illustration.
Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <C>.
55606
35.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
Engage the 2 claws to connect the DLC3 connector.
Engage the clamp.
Connect the connector.
|
Install in this Direction |
Engage the 2 claws as shown in the illustration.
Install the No. 1 instrument panel under cover sub-assembly with the 3 screws <C>.
55318C
36.INSTALL INSTRUMENT SIDE PANEL LH
|
Install in this Direction |
Engage the 3 guides as shown in the illustration.
|
Install in this Direction |
Engage the 4 clips and 2 claws to install the instrument side panel LH as shown in the illustration.
62212
37.INSTALL FRONT PILLAR GARNISH LH
62312B
38.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
62112A
39.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
67914
40.INSTALL FRONT DOOR SCUFF PLATE LH
58810J
41.INSTALL CONSOLE BOX ASSEMBLY
84329
42.INSTALL TURN SIGNAL SWITCH
84650
43.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
45286B
44.INSTALL UPPER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)
45286B
45.INSTALL UPPER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)
45024
46.INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)
45024
47.INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)
48.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
84306
49.INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
50.INSTALL STEERING WHEEL ASSEMBLY
51.CHECK STEERING WHEEL CENTER POINT
45130
52.INSTALL HORN BUTTON ASSEMBLY
53. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)