Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › ECD SYSTEM
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355844 ECD SYSTEM C

N04C-UH ENGINE CONTROL  ECD SYSTEM  P0096  Intake Air Temperature Sensor 2 Circuit Range / Performance  


DESCRIPTION

Refer to DTC P0095 (Click hereEngine / Hybrid System>N04C-UH (ENGINE CONTROL)>ECD SYSTEM>P0095).

DTC No. DTC Detection Condition Trouble Area
P0096 When following conditions (a) and (b) are met:
(2 trip detection logic)
(a) Vehicle is driven at varying engine loads (accelerating and decelerating)
(b) Intake air temperature (after turbocharged) remains within 2°C (3.6°F) of the engine starting temperature
Intake air temperature sensor (after turbocharged)

CAUTION / NOTICE / HINT

HINT:

Read freeze frame data using the intelligent tester. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0096)
a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the tester on.


d.

Enter the following menus: Powertrain / Engine and ECT / DTC.


e.

Read the DTCs.

Result:
Result Proceed to
DTC P0096 A
DTC P0096 and other DTCs B


HINT:

If any DTCs other than P0096 are output, troubleshoot those DTCs first.




A

B