Home › Engine / Hybrid System › N04C-VQ (ENGINE CONTROL) › ECD SYSTEM
RM2850E _51 Engine / Hybrid System _073138 N04C-VQ ENGINE CONTROL _0355854 ECD SYSTEM C

N04C-VQ ENGINE CONTROL  ECD SYSTEM  P0096  Intake Air Temperature Sensor 2 Circuit Range / Performance  


DESCRIPTION

Refer to DTC P0095 (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>ECD SYSTEM>P0095).

DTC No. DTC Detection Condition Trouble Area
P0096 When the following conditions (a) and (b) are met:(2 trip detection logic)

(a) Vehicle is driven at varying engine loads (accelerating and decelerating)

(b) Intake air temperature after turbo charged remains within 2°C (3.6°F) of the engine starting temperature


Intake air temperature sensor

WIRING DIAGRAM

CAUTION / NOTICE / HINT

HINT:

Read freeze frame data using the GTS. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, as well as other data recorded at the time of a malfunction.


PROCEDURE

1.CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0096)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.


e.

Read the DTCs.

Result:
Result Proceed to
DTC P0096 is output A
DTC P0096 and other DTCs are output B


HINT:

If any DTCs other than P0096 are output, troubleshoot those DTCs first.




A

B