Home › Engine / Hybrid System › N04C-VQ (ENGINE CONTROL) › ECD SYSTEM
RM2850E _51 Engine / Hybrid System _073138 N04C-VQ ENGINE CONTROL _0355854 ECD SYSTEM C

N04C-VQ ENGINE CONTROL  ECD SYSTEM  P0101  Mass Air Flow Circuit Range / Performance Problem  


DESCRIPTION

Refer to DTC P0102 (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>ECD SYSTEM>P0102).

DTC No. DTC Detection Condition Trouble Area
P0101 Air flow rate from mass air flow meter sub-assembly is out of specified threshold under the following conditions (2 trip detection logic):
·

Engine speed is idling or more than 2000 rpm

·

Engine coolant temperature is 70°C (158°F) or higher


Mass air flow meter sub-assembly

CAUTION / NOTICE / HINT

HINT:

Read freeze frame data using the GTS. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, as well as other data recorded at the time of a malfunction.


PROCEDURE

1.CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0101)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Data List / Trouble Codes.


e.

Read the DTCs.


Result:
Result Proceed to
DTC P0101 is output A
DTC P0101 and other DTCs are output B



A

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY

B