Home › Engine / Hybrid System › N04C-VQ (ENGINE CONTROL) › ECD SYSTEM
RM2850E _51 Engine / Hybrid System _073138 N04C-VQ ENGINE CONTROL _0355854 ECD SYSTEM C

N04C-VQ ENGINE CONTROL  ECD SYSTEM  P0115  Engine Coolant Temperature Circuit  P0117  Engine Coolant Temperature Circuit Low Input  P0118  Engine Coolant Temperature Circuit High Input  


DESCRIPTION

A thermistor is built into the engine coolant temperature sensor and changes its resistance value according to the engine coolant temperature.

The structure of the sensor and connection to the ECM is the same as the intake air temperature sensor.

DTC No. DTC Detection Condition Trouble Area
P0115 Open or short in engine coolant temperature sensor circuit for 0.5 seconds
·

Open or short in engine coolant temperature sensor circuit

·

Engine coolant temperature sensor

·

ECM


P0117 Short in engine coolant temperature sensor circuit for 0.5 seconds
·

Short in engine coolant temperature sensor circuit

·

Engine coolant temperature sensor

·

ECM


P0118 Open in engine coolant temperature sensor circuit for 0.5 seconds
·

Open in engine coolant temperature sensor circuit

·

Engine coolant temperature sensor

·

ECM



HINT:

When DTC P0115, P0117 and/or P0118 are detected, check the engine coolant temperature by entering the following menus on the GTS: Powertrain / Engine and ECT / Data List / Coolant Temp.

Temperature Displayed Malfunction
-40°C (-40°F) Open circuit
140°C (284°F) Short circuit


WIRING DIAGRAM

A398533E08
0.281,2.75 2.76,2.99 2.479,0.24 10 false Engine Coolant Temperature Sensor 0.271,2.552 0.729,2.75 0.458,0.198 10 false k1 4.979,1.323 5.438,1.521 0.458,0.198 10 false B105 4.99,1.896 5.448,2.094 0.458,0.198 10 false B104 1.542,1.219 2,1.417 0.458,0.198 10 false THW 1.646,1.76 2.104,1.958 0.458,0.198 10 false E2 5.458,1.208 5.917,1.406 0.458,0.198 10 false THW 5.479,1.781 5.938,1.979 0.458,0.198 10 false E2 5.073,1.677 5.531,1.875 0.458,0.198 10 false 14 5.115,1.104 5.323,1.302 0.208,0.198 10 false 9 1.99,1.771 2.198,1.969 0.208,0.198 10 false 2 1.969,1.198 2.177,1.396 0.208,0.198 10 false 1 6.198,0.844 6.656,1.042 0.458,0.198 10 false 5 V 6.094,1.115 6.552,1.313 0.458,0.198 10 false R 5.875,2.823 6.333,3.021 0.458,0.198 10 false ECM

CAUTION / NOTICE / HINT

NOTICE:

After replacing the ECM, the new ECM needs registration (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION) and initialization (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>ECD SYSTEM>INITIALIZATION).


HINT:
·

If DTCs that are related to different systems are output simultaneously while terminal E2 is used as a ground terminal, terminal E2 may have an open circuit.

·

Read freeze frame data using the GTS. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, as well as other data recorded at the time of a malfunction.



PROCEDURE

1.READ VALUE USING GTS (COOLANT TEMPERATURE)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Data List / Coolant Temp.

Result:
Temperature Display Proceed to
-40°C (-40°F) A
140°C (284°F) B
OK (same as the actual engine coolant temperature) C


HINT:
·

If there is an open circuit, the GTS indicates -40°C (-40°F).

·

If there is a short circuit, the GTS indicates 140°C(284°F).





A

2.READ VALUE USING GTS (CHECK FOR OPEN IN WIRE HARNESS)

C

B

4.READ VALUE USING GTS (CHECK FOR SHORT IN WIRE HARNESS)
2.READ VALUE USING GTS (CHECK FOR OPEN IN WIRE HARNESS)
A256065E04
0.5,0.948 0.99,1.24 0.49,0.292 0.917,1.74 1.615,1.115 true 2.563,1.771 1.854,1.115 true 0.229,0.167 0.563,0.479 0.333,0.313 10 false *a 0.688,1 0.875,1.198 0.188,0.198 10 false k1 0.708,1.781 1.167,1.979 0.458,0.198 10 false THW 2.521,1.792 2.833,1.99 0.313,0.198 10 false E2

a.

Disconnect the engine coolant temperature sensor connector.


b.

Connect terminals 1 (THW) and 2 (E2) of the engine coolant temperature sensor wire harness side connector.


c.

Connect the GTS to the DLC3.


d.

Turn the ignition switch to ON.


e.

Turn the GTS on.


f.

Enter the following menus: Powertrain / Engine and ECT / Data List / Coolant Temp.


g.

Read the value.

Standard:

140°C (284°F)


Text in Illustration
*a Front view of wire harness connector
(to Engine Coolant Temperature Sensor)


Result:
Proceed to
OK
NG



OK

NG

3.READ VALUE USING GTS (CHECK FOR OPEN IN ECM)
3.READ VALUE USING GTS (CHECK FOR OPEN IN ECM)
A260250E33
1.302,0.104 1.792,0.396 0.49,0.292 1.844,0.104 2.333,0.396 0.49,0.292 2.188,0.865 2.917,1.729 true 1.635,0.802 1.031,1.719 true 1.396,0.167 1.813,0.323 0.417,0.156 10 false B105 1.938,0.167 2.417,0.323 0.479,0.156 10 false B104 0.063,0.073 0.25,0.281 0.188,0.208 10 false *a 0.625,1.771 1.26,2.042 0.635,0.271 10 false 9 (THW) 2.729,1.771 3.427,2.01 0.698,0.24 10 false 14 (E2)

a.

Disconnect the engine coolant temperature sensor connector.


b.

Connect terminals THW and E2 of the ECM connector.

HINT:

Before checking, perform a visual and contact pressure check for the ECM connector.



c.

Connect the GTS to the DLC3.


d.

Turn the ignition switch to ON.


e.

Turn the GTS on.


f.

Enter the following menus: Powertrain / Engine and ECT / Data List / Coolant Temp.


g.

Read the value.

Standard:

140°C (284°F)


Text in Illustration
*a Component with harness connected
(ECM)


Result:
Proceed to
OK
NG



OK

REPAIR OR REPLACE HARNESS OR CONNECTOR (ECM - ENGINE COOLANT TEMPERATURE SENSOR)

NG

4.READ VALUE USING GTS (CHECK FOR SHORT IN WIRE HARNESS)
a.

Disconnect the engine coolant temperature sensor connector.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Powertrain / Engine and ECT / Data List / Coolant Temp.


f.

Read the value.

Standard:

-40°C (-40°F)



Result:
Proceed to
OK
NG



OK

NG

5.CHECK HARNESS AND CONNECTOR (ECM - ENGINE COOLANT TEMPERATURE SENSOR)
5.CHECK HARNESS AND CONNECTOR (ECM - ENGINE COOLANT TEMPERATURE SENSOR)
a.

Disconnect the engine coolant temperature sensor connector.


b.

Disconnect the ECM connector.


c.

Measure the resistance according to the valve(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B105-9 (THW) or k1-1 (THW) - Body ground Always 10 kΩ or higher
B104-14 (E2) or k1-2 (E2) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (ECM - ENGINE COOLANT TEMPERATURE SENSOR)