DTC P0630 is stored when the Vehicle Identification Number (VIN) is not stored in the Engine Control Module (ECM) or the input VIN is not accurate. Input the VIN with the GTS.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0630 | Either condition is met (1 trip detection logic):
·
VIN not stored in ECM ·
Input VIN in ECM not accurate |
ECM |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Read the DTCs.
| Result | Proceed to |
|---|---|
| DTC P0630 is output | A |
| DTC P0630 and other DTCs are output | B |
If any DTCs other than P0630 are output, troubleshoot those DTCs first.
If P0630 is stored, the VIN must be input to the ECM using the GTS. However, all DTCs are cleared automatically by the GTS when the VIN is input. If DTCs other than P0630 are stored, check them first.
A
B
Input the VIN code (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION).
| Proceed to |
|---|
| NEXT |
NEXT