Home › Engine / Hybrid System › N04C-VQ (ENGINE CONTROL) › DIESEL THROTTLE BODY
RM2850E _51 Engine / Hybrid System _073138 N04C-VQ ENGINE CONTROL _0355855 DIESEL THROTTLE BODY A

N04C-VQ ENGINE CONTROL  DIESEL THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 58521D 1.REMOVE ENGINE SERVICE HOLE COVER MAT

Hide 58410 2.REMOVE ENGINE SERVICE HOLE COVER

Hide 58734B 3.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58420 4.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY

Hide 58123A 5.REMOVE SHIFT AND SELECT LEVER SUPPORT WITH BOOTS

Hide 33506F 6.REMOVE FLOOR SHIFT CONTROL SHIFT LEVER RETAINER SUB-ASSEMBLY

Hide 58701A 7.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY

Hide 51441D 8.REMOVE NO. 1 ENGINE UNDER COVER

Hide 53712C 9.REMOVE FRONT FENDER APRON LH

a.
A146649

Remove the 6 bolts and the front fender apron LH.


Hide 44360 10.DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY

Hide 44379A 11.REMOVE NO. 2 OIL RESERVOIR BRACKET

Hide 17030 12.REMOVE AIR HOSE ASSEMBLY

a.
A391379E02
2.125,1.938 2.208,1.938 2.208,1.938 2.26,1.469 true 2.01,1.875 2.167,2.073 0.156,0.198 10 true A

Disconnect the 2 clamps.


b.

Loosen the 2 hose clamps.

NOTICE:

Do not remove the hose clamp A.



c.

Remove the bolt and air hose assembly.


Hide 26100 13.REMOVE DIESEL THROTTLE BODY

a.
A257302

Disconnect the 2 connectors.


b.
A257301

Remove the 2 bolts, 2 nuts and diesel throttle body.

Text in Illustration
V100135

Bolt
V100136

Nut