Home › Engine / Hybrid System › N04C-VQ (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR
RM2850E _51 Engine / Hybrid System _073138 N04C-VQ ENGINE CONTROL _0355860 CRANKSHAFT POSITION SENSOR A

N04C-VQ ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301K 1.INSTALL CRANKSHAFT POSITION SENSOR

a.

Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.


b.

Install the crankshaft position sensor with the bolt.

Torque:

12 N*m (122 kgf*cm, 9 ft.*lbf)



c.

Connect the crankshaft position sensor connector.


Hide 51441D 2.INSTALL NO. 1 ENGINE UNDER COVER