Home › Engine / Hybrid System › N04C-VQ (ENGINE CONTROL) › MANIFOLD ABSOLUTE PRESSURE SENSOR
RM2850E _51 Engine / Hybrid System _073138 N04C-VQ ENGINE CONTROL _0355862 MANIFOLD ABSOLUTE PRESSURE SENSOR A

N04C-VQ ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89421E 1.INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

a.

Install the manifold absolute pressure sensor onto the intake manifold with the 2 bolts.

Torque:

12 N*m (122 kgf*cm, 9 ft.*lbf)



b.

Connect the vacuum hose and slide the 2 hose clamps to secure the hose.


c.

Connect the connector to the manifold absolute pressure sensor.


Hide 53712C 2.INSTALL FRONT FENDER APRON LH

a.

Install the front fender apron LH with the 6 bolts.

Torque:

7.0 N*m (71 kgf*cm, 62 in.*lbf)



Hide 58701A 3.INSTALL FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY

Hide 33506F 4.INSTALL FLOOR SHIFT CONTROL SHIFT LEVER RETAINER SUB-ASSEMBLY

Hide 58123A 5.INSTALL SHIFT AND SELECT LEVER SUPPORT WITH BOOTS

Hide 58420 6.INSTALL NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY

Hide 58734B 7.INSTALL REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58410 8.INSTALL ENGINE SERVICE HOLE COVER

Hide 58521D 9.INSTALL ENGINE SERVICE HOLE COVER MAT