31490
1.INSTALL CLUTCH ACCUMULATOR ASSEMBLY
Install the clutch accumulator assembly with the 2 bolts.
18 N*m (178 kgf*cm, 13 ft.*lbf)
| *A | for LHD | *B | for RHD |
Using a union nut wrench (12 mm), connect the 2 way to flexible hose tube and connector to 2 way tube to the clutch accumulator assembly.
24 N*m (245 kgf*cm, 18 ft.*lbf)
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
When using a union nut wrench (fulcrum length of 20 mm (0.787 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 22 N*m (220 kgf*cm, 16 ft.*lbf)
| *A | for LHD | *B | for RHD |
| *a | Torque Wrench Fulcrum Length | *b | Union Nut Wrench |
2.CHECK FOR CLUTCH FLUID LEAKAGE
3.BLEED AIR FROM CLUTCH PIPE LINE
4.CHECK FLUID LEVEL IN RESERVOIR
51441
5.INSTALL NO. 1 ENGINE UNDER COVER
6.INSTALL FRONT BUMPER COVER
w/ Snorkel Air Cleaner
Click hereVehicle Interior>EXTERIOR>FRONT BUMPER (w/ Snorkel Air Cleaner)>INSTALLATION
w/o Snorkel Air Cleaner
Click hereVehicle Interior>EXTERIOR>FRONT BUMPER(w/o Snorkel Air Cleaner)>INSTALLATION