33110
1.REMOVE MANUAL TRANSMISSION ASSEMBLY
31204
2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY
Remove the clutch release fork sub-assembly together with the clutch release bearing assembly from the manual transmission assembly.
31230
3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY
Remove the clutch release bearing assembly from the clutch release fork sub-assembly.
31236B
4.REMOVE RELEASE FORK SUPPORT
Remove the release fork support from the manual transmission assembly.
31232A
5.REMOVE RELEASE BEARING HUB CLIP
31210
6.REMOVE CLUTCH COVER ASSEMBLY
Put matchmarks on the clutch cover assembly and the flywheel sub-assembly.
| *A | for M152 and M155 with 1HZ | *B | for M155 with 1BZ-FPE |
| *C | for M156 | - | - |
| *a | Matchmark | - | - |
Loosen each set bolt one turn at a time until the spring tension is released.
for M155 with 1BZ-FPE:
Remove the 8 bolts and clutch cover assembly.
Do not drop the clutch disc assembly.
except M155 with 1BZ-FPE:
Remove the 6 bolts and clutch cover assembly.
Do not drop the clutch disc assembly.
31250
7.REMOVE CLUTCH DISC ASSEMBLY
Keep the lining part of the clutch disc assembly, pressure plate and surface of the flywheel sub-assembly free from oil and foreign matter.
33311W
8.REMOVE INPUT SHAFT BEARING
Remove the 2 bolts at diametrically opposite points.
Using SST, remove the input shaft bearing.