Home › Engine / Hybrid System › N04C-VQ (COOLING) › FAN
RM2850E _51 Engine / Hybrid System _073147 N04C-VQ COOLING _0355931 FAN A

N04C-VQ COOLING  FAN  REMOVAL  


PROCEDURE

Hide 58521D 1.REMOVE ENGINE SERVICE HOLE COVER MAT

Hide 58410 2.REMOVE ENGINE SERVICE HOLE COVER

Hide 58734B 3.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58420 4.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY

Hide 58123A 5.REMOVE SHIFT AND SELECT LEVER SUPPORT WITH BOOTS

Hide 33506F 6.REMOVE FLOOR SHIFT CONTROL SHIFT LEVER RETAINER SUB-ASSEMBLY

Hide 58701A 7.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY

Hide 16361A 8.REMOVE FAN AND GENERATOR V BELT

Hide 16572 10.REMOVE OUTLET RADIATOR HOSE

a.
A338806

Slide the 2 hose clamps and remove the outlet radiator hose.


Hide 16701 11.REMOVE FAN SHROUD SUB-ASSEMBLY

a.
A396691

Loosen the 4 nuts from the fan pulley.


b.
A220202

Disengage the hose clamp and disconnect the No. 1 intercooler air hose.


c.
A220203

Disengage the 3 hose clamps and disconnect the radiator reservoir hose.


d.
A220204

Remove the 4 bolts from the fan shroud sub-assembly.


e.

Remove the fluid coupling assembly and fan shroud sub-assembly.

NOTICE:

Be careful not to damage the radiator core.



Hide 16361 12.REMOVE FAN

a.
A147502

Remove the 4 nuts and fan from the fluid coupling assembly.


Hide 16371 13.REMOVE FAN PULLEY

a.
A147491

Remove the fan pulley from the engine water pump assembly.