Home › Engine / Hybrid System › N04C-VQ (LUBRICATION) › OIL LEVEL SENSOR
RM2850E _51 Engine / Hybrid System _073148 N04C-VQ LUBRICATION _0355936 OIL LEVEL SENSOR A

N04C-VQ LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Install the engine oil level sensor with the 4 bolts.

Torque:

12 N*m (120 kgf*cm, 9 ft.*lbf)



b.

Connect the engine oil level sensor connector.


Hide 51446C 4.INSTALL ENGINE UNDER COVER BRACKET LH

Hide 51445D 5.INSTALL ENGINE UNDER COVER BRACKET RH

Hide 51441D 6.INSTALL NO. 1 ENGINE UNDER COVER

Hide 7.INSTALL ENGINE SERVICE HOLE MAIN COVER