15710
1.INSTALL OIL COOLER ASSEMBLY
Install the oil cooler assembly and 2 new gaskets to the oil cooler cover sub-assembly with the 4 nuts.
18 N*m (184 kgf*cm, 13 ft.*lbf)
15701C
2.INSTALL OIL COOLER COVER SUB-ASSEMBLY
Install a new gasket and the 4 O-rings as shown in the illustration.
| *1 | O-ring |
| *a | Oil Cooler Sub-assembly Side |
| *b | Cylinder Block Side |
Install the oil cooler cover sub-assembly to the cylinder block with the 15 bolts.
29 N*m (291 kgf*cm, 21 ft.*lbf)
3.INSTALL OIL FILTER SUB-ASSEMBLY
17201
4.INSTALL TURBOCHARGER SUB-ASSEMBLY