Home › Engine / Hybrid System › N04C-VQ (STARTING) › STARTER
RM2850E _51 Engine / Hybrid System _073149 N04C-VQ STARTING _0355940 STARTER A

N04C-VQ STARTING  STARTER  INSTALLATION  


PROCEDURE

Hide 28100 1.INSTALL STARTER ASSEMBLY

a.

Install the starter assembly with the bolt and nut.

Torque:

71 N*m (724 kgf*cm, 52 ft.*lbf)



b.

Install the wire harness clamp bracket with the bolt.

Torque:

18 N*m (178 kgf*cm, 13 ft.*lbf)



c.

Connect the 2 wire harness clamps.


d.

Connect the terminal 50 connector to the starter assembly.


e.

Connect the wire harness to terminal 30 with the nut, and install the terminal cap.

Torque:

21 N*m (214 kgf*cm, 15 ft.*lbf)



Hide 51446C 3.INSTALL ENGINE UNDER COVER BRACKET LH

Hide 51445D 4.INSTALL ENGINE UNDER COVER BRACKET RH

Hide 51441D 5.INSTALL NO. 1 ENGINE UNDER COVER

Hide 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL