Home › Engine / Hybrid System › N04C-VL (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR
RM2850E _51 Engine / Hybrid System _073159 N04C-VL ENGINE CONTROL _0355995 CRANKSHAFT POSITION SENSOR A

N04C-VL ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 51441D 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 2.REMOVE CRANKSHAFT POSITION SENSOR

a.
A146645

Disconnect the crankshaft position sensor connector.


b.

Remove the bolt and crankshaft position sensor.