1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
58410
2.REMOVE ENGINE SERVICE HOLE COVER
Detach the 2 catch hooks and 2 guides, and remove the engine service hole cover.
58734B
3.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP
Remove the rear engine service cover weatherstrip.
58521D
4.REMOVE ENGINE SERVICE HOLE COVER MAT
Detach the 2 hooks and remove the engine service hole cover mat.
58420
5.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
Turn the knob to detach the hook, detach the 2 guides and remove the No. 2 engine service hole cover assembly.
| *a | Knob |
58534A
6.REMOVE TRANSMISSION COVER MAT
Remove the transmission cover mat.
58286
7.REMOVE NO. 1 SHIFT AND SELECT LEVER BOOT
Remove the shift knob.
Remove the 4 bolts and No. 1 shift and select lever boot.
33820B
8.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
Remove the 2 clips from the floor shift shift lever sub-assembly.
Remove the nut and clip, and disconnect the shift cable and select cable.
Do not sway the control cable over 8° and apply load.
Remove the nut and separate the shift wire clamp from the front engine service cover panel sub-assembly.
33503F
9.REMOVE FLOOR SHIFT SHIFT LEVER SUB-ASSEMBLY
Remove the 4 bolts and the floor shift shift lever sub-assembly.
58701A
10.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY
Remove the 3 bolts and the front engine service cover panel sub-assembly.
51441D
11.REMOVE NO. 1 ENGINE UNDER COVER
12.DRAIN ENGINE COOLANT
88310A
13.REMOVE NO. 1 V BELT (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) (w/ Air Conditioning System)
88320
14.SEPARATE COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)
16572
15.REMOVE OUTLET RADIATOR HOSE
Loosen the 2 hose clamps and remove the outlet radiator hose.
16701
16.REMOVE FAN SHROUD SUB-ASSEMBLY
Remove the 4 nuts from the fan pulley.
Remove the fan and generator V belt.
(Click hereEngine / Hybrid System>N04C-VL (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL)
Disengage the hose clamp and separate the intercooler air hose.
Disengage the 3 hose clamps and separate the radiator reserve tank hose.
Remove the 4 bolts from the fan shroud sub-assembly.
Remove the fluid coupling assembly and fan shroud sub-assembly.
Be careful not to damage the radiator core.
16210
17.REMOVE FLUID COUPLING
Remove the 4 nuts and the fan from the fluid coupling.
16371
18.REMOVE FAN PULLEY
Remove the fan pulley from the engine water pump assembly.