Home › Engine / Hybrid System › N04C-VL (LUBRICATION) › OIL AND OIL FILTER › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073165 N04C-VL LUBRICATION _0356027 OIL AND OIL FILTER A

N04C-VL LUBRICATION  OIL AND OIL FILTER  REPLACEMENT  


CAUTION / NOTICE / HINT

CAUTION:
·

Prolonged and repeated contact with engine oil will result in the loss of natural oil from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.

·

Wear protective clothing and gloves. Avoid contact with used oil. If contact occurs, wash your skin thoroughly with soap or waterless hand cleaner. Never use gasoline, thinners, or solvents to wash the skin.

·

In order to protect the environment, dispose of used oil and used oil filters at designated disposal sites only.



PROCEDURE

Hide 58410 1.REMOVE ENGINE SERVICE HOLE COVER

Hide 58734B 2.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58521D 3.REMOVE ENGINE SERVICE HOLE COVER MAT

Hide 58420 4.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY

Hide 5.DRAIN ENGINE OIL

a.

Remove the oil filler cap sub-assembly.


b.

Remove the drain plug from the oil pan and drain the engine oil into a container.


c.

Clean the drain plug.


d.

Install the drain plug with a new gasket.

Torque:

41 N*m (418 kgf*cm, 30 ft.*lbf)



Hide 6.REMOVE OIL FILTER SUB-ASSEMBLY

a.

Using SST, remove the oil filter sub-assembly.

SST
S0955-31030  


Hide 7.INSTALL OIL FILTER SUB-ASSEMBLY

a.

Clean the oil filter sub-assembly installation surface.


b.

Apply engine oil to the oil filter gasket of a new oil filter sub-assembly.


c.

Lightly screw the oil filter sub-assembly to the engine until the oil filter sub-assembly does not turn.


d.

Using SST, tighten the oil filter sub-assembly an additional 2/3 turn.

SST
S0955-31030  

Torque:

20 N*m (200 kgf*cm, 14 ft.*lbf)



Hide 8.ADD ENGINE OIL

a.

Add fresh oil and install the oil filler cap sub-assembly.

Engine Oil:
Oil Grade
·

API (CJ-4)

·

JASO (DH-2)

·

ACEA (E-6, E-9)


·

5W-30

·

10W-30

·

15W-40




Capacity:
Item Fill amount
Drain and refill with oil filter change 7.3 liters (7.7 US qts, 6.4 Imp. qts)
Drain and refill without oil filter change 6.1 liters (6.4 US qts, 5.4 Imp. qts)
Dry fill 8.4 liters ( 8.9 US qts, 7.4 Imp. qts)



Hide 9.INSPECT FOR OIL LEAK

a.

Warm up the engine and check for engine oil leaks.


Hide 58420 11.INSTALL NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY

Hide 58521D 12.INSTALL ENGINE SERVICE HOLE COVER MAT

Hide 58734B 13.INSTALL REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58410 14.INSTALL ENGINE SERVICE HOLE COVER