15710C
1.INSTALL OIL COOLER GASKET
Install a new oil cooler gasket.
15710
2.INSTALL OIL COOLER ASSEMBLY
Install 4 new O-rings as shown in the illustration.
| *a | Oil Cooler Assembly Side |
Install the oil cooler assembly with 2 new gaskets to the oil cooler cover sub-assembly with the 8 washers and 4 nuts.
18 N*m (184 kgf*cm, 13 ft.*lbf)
Install the oil cooler assembly with oil cooler cover sub-assembly with the 15 bolts.
29 N*m (291 kgf*cm, 21 ft.*lbf)
83530
3.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY
4.INSTALL OIL FILTER SUB-ASSEMBLY
17201
5.INSTALL TURBOCHARGER SUB-ASSEMBLY