1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
51441D
2.REMOVE NO. 1 ENGINE UNDER COVER
53712C
3.REMOVE FRONT FENDER APRON LH
28100
4.REMOVE STARTER ASSEMBLY
Pull off the terminal cap and remove the nut, and disconnect the starter wire from terminal 30.
Disconnect the terminal 50 connector from the starter assembly.
| *a | terminal 50 |
| *b | terminal 30 |
Disconnect the 2 wire harness clamps.
Remove the bolt and the wire harness clamp bracket.
Remove the nut, bolt, and starter assembly.
|
Bolt |
|
Nut |