Home › Engine / Hybrid System › N04C-VL (ENGINE CONTROL) › DIESEL THROTTLE BODY
RM2850E _51 Engine / Hybrid System _073159 N04C-VL ENGINE CONTROL _0355990 DIESEL THROTTLE BODY A

N04C-VL ENGINE CONTROL  DIESEL THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 58410 1.REMOVE ENGINE SERVICE HOLE COVER

Hide 58734B 2.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58521D 3.REMOVE ENGINE SERVICE HOLE COVER MAT

Hide 58420 4.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY

Hide 33504F 5.REMOVE SHIFT KNOB

Hide 58534A 6.REMOVE TRANSMISSION COVER MAT

Hide 58286 7.REMOVE NO. 1 SHIFT AND SELECT LEVER BOOT

Hide 33820B 8.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

Hide 33503F 9.REMOVE FLOOR SHIFT SHIFT LEVER SUB-ASSEMBLY

Hide 58701A 10.REMOVE ENGINE SERVICE COVER PANEL SUB-ASSEMBLY FRONT

Hide 51441D 11.REMOVE NO. 1 ENGINE UNDER COVER

Hide 53712C 12.REMOVE FRONT FENDER APRON LH

a.
A146649

Remove the 6 bolts and the front fender apron LH.


Hide 17342P 13.REMOVE NO. 2 AIR HOSE

a.
A226323

Disconnect the connector and the 2 hose clamps.


b.
A226324

Loosen the 2 clamps.


c.

Remove the bolt and the No. 2 air hose.


Hide 14.REMOVE INTAKE PIPE WITH VENTURI ASSEMBLY

a.
A146653

Disconnect the throttle control motor connector and throttle position sensor connector.


b.

Disconnect the vacuum hose from the intake pipe.


c.
A175459

Remove the bolt and separate the oil level dipstick guide.


d.
A348251

Remove the 2 nuts, 2 bolts and the intake pipe with venturi assembly.

Text in Illustration
V100135

Bolt
V100136

Nut


Hide 26100 15.REMOVE VENTURI ASSEMBLY

a.
A146655

Remove the 4 nuts and the venturi assembly.