58521D
1.REMOVE ENGINE SERVICE HOLE COVER MAT (w/ Carpet)
58410
2.REMOVE ENGINE SERVICE HOLE COVER
58734B
3.REMOVE ENGINE SERVICE COVER WEATHERSTRIP REAR
58521D
4.REMOVE ENGINE SERVICE HOLE COVER MAT (w/o Carpet)
58420
5.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
58534A
6.REMOVE TRANSMISSION COVER MAT (for Manual Transmission)
33531B
7.REMOVE SHIFT AND SELECT LEVER SHAFT DUST BOOT (for LHD)
58848A
8.REMOVE SHIFT LEVER HOLE COVER WITH BOOTS (for RHD)
33820B
9.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for LHD)
33820B
10.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (for RHD)
33504F
11.REMOVE SHIFT LEVER SUB-ASSEMBLY (for Manual Transmission)
58841A
12.REMOVE SHIFTING HOLE COVER (for Automatic Transmission)
33820B
13.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY (for Automatic Transmission)
33503F
14.REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY (for Automatic Transmission)
58701A
15.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY (for LHD)
58701A
16.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY (for RHD)
51459
17.REMOVE ENGINE SIDE COVER STAY (for TCAP Made)
51441D
18.REMOVE NO. 1 ENGINE UNDER COVER (for Plastic Type)
51441D
19.REMOVE NO. 1 ENGINE UNDER COVER (for Metal Type)
20.DRAIN ENGINE COOLANT
21.DRAIN AUTOMATIC TRANSMISSION FLUID
22.REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT (w/ Air Conditioning System)
| *1 | Fixing Bolt A |
| *2 | Adjusting Bolt B |
Loosen the adjusting bolt B.
Loosen the fixing bolt A, then remove the No. 1 V belt.
88320
23.SEPARATE COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)
16572
24.REMOVE OUTLET RADIATOR HOSE
Slide the 2 hose clamps and remove the outlet radiator hose.
32922
25.DISCONNECT NO. 1 OIL COOLER OUTLET TUBE (for Automatic Transmission)
Loosen the clip and disconnect the cooler outlet tube.
32921
26.DISCONNECT NO. 1 OIL COOLER INLET TUBE (for Automatic Transmission)
Loosen the clip and disconnect the cooler inlet tube.
16701
27.REMOVE FAN SHROUD SUB-ASSEMBLY (for LHD)
Loosen the 4 nuts from the fan pulley.
Remove the fan and generator V belt.
Click hereEngine / Hybrid System>N04C-UH (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL
Disengage the hose clamp and disconnect the No. 1 intercooler air hose.
Disengage the 3 hose clamps and disconnect the radiator reservoir hose.
Remove the 4 bolts from the fan shroud sub-assembly.
Remove the fluid coupling assembly and fan shroud sub-assembly.
Be careful not to damage the radiator core.
16701
28.REMOVE FAN SHROUD SUB-ASSEMBLY (for RHD)
Loosen the 4 nuts from the fan pulley.
Remove the fan and generator V belt.
Click hereEngine / Hybrid System>N04C-UH (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL
Disengage the 3 hose clamps and disconnect the radiator reservoir hose.
Disengage the hose clamp and disconnect the No. 1 intercooler air hose.
Remove the 4 bolts from the fan shroud sub-assembly.
Remove the fluid coupling assembly and fan shroud sub-assembly.
Be careful not to damage the radiator core.
16361
29.REMOVE FAN
Remove the 4 nuts and fan from the fluid coupling assembly.
16371
30.REMOVE FAN PULLEY
Remove the fan pulley from the engine water pump assembly.