Home › Engine / Hybrid System › N04C-UH (LUBRICATION) › ENGINE OIL COOLER › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073179 N04C-UH LUBRICATION _0356107 ENGINE OIL COOLER A

N04C-UH LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 17201 1.REMOVE TURBOCHARGER SUB-ASSEMBLY

Hide 83530 3.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

Hide 15710 4.REMOVE OIL COOLER ASSEMBLY

a.
A177027

Remove the 2 bolts and harness clamp bracket.


b.
A430106

Remove the 15 bolts and oil cooler assembly from the cylinder block.


c.

Remove the gasket and 4 O-rings.


d.
A147515

Remove the 4 nuts, 8 washers and oil cooler assembly.


e.

Remove the 2 gaskets.


Hide 15710C 5.REMOVE OIL COOLER GASKET

a.

Remove the oil cooler gasket.