Wear protective gloves. Sharp areas on the parts may injure your hands.
The procedure listed below is for 2nd row to 7th row for long body, and 2nd row to 6th row for standard body.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
1.REMOVE REAR NO. 1 SEAT ASSEMBLY LH
71876E
2.REMOVE RECLINING ADJUSTER INSIDE COVER LH (except 2nd Row Seat)
71812K
3.REMOVE RECLINING ADJUSTER COVER LH (for 2nd Row Seat)
73380A
4.REMOVE REAR SEAT INNER BELT ASSEMBLY (except 2nd Row Seat)
Remove the bolt and rear seat inner belt assembly.
73306
5.REMOVE SEAT INNER BELT SUB-ASSEMBLY (for 2nd Row Seat)
Use the same procedure as for the rear seat inner belt assembly.