Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for Single-Passenger Seat with 3 Point Type Seat Belt)
RM2850E _58 Vehicle Interior _073190 SEAT BELT _0356178 REAR SEAT INNER BELT ASSEMBLY(for Single-Passenger Seat with 3 Point Type Seat Belt) A

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for Single-Passenger Seat with 3 Point Type Seat Belt)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

The procedure listed below is for 2nd row to 7th row for long body, and 2nd row to 6th row for standard body.

·

The procedure listed below is a representative example.

·

Use the same procedure for all rows, unless otherwise specified.



PROCEDURE

Hide 73380A 1.INSTALL REAR SEAT INNER BELT ASSEMBLY (except 2nd Row Seat)

a.
B466224E01
0.479,1.698 1.365,1.604 true 1.802,1.708 2.74,1.438 true 0.313,1.615 0.625,1.813 0.313,0.198 10 false *a 2.781,1.313 3.094,1.51 0.313,0.198 10 false *a

Install the rear seat inner belt assembly with the bolt.

Torque:

42 N*m (428 kgf*cm, 31 ft.*lbf)


Text in Illustration
*a Location

NOTICE:

The rear seat outer belt assembly must not overlap the location.



Hide 73306 2.INSTALL SEAT INNER BELT SUB-ASSEMBLY (for 2nd Row Seat)

HINT:

Use the same procedure as for the rear seat inner belt assembly.


Hide 71876E 3.INSTALL RECLINING ADJUSTER INSIDE COVER LH (except 2nd Row Seat)

Hide 71812K 4.INSTALL RECLINING ADJUSTER COVER LH (for 2nd Row Seat)