Wear protective gloves. Sharp areas on the parts may injure your hands.
The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
1.REMOVE REAR NO. 1 SEAT ASSEMBLY RH
2.REMOVE SUB SEAT ASSEMBLY (w/ Sub Seat)
71811C
3.REMOVE RECLINING ADJUSTER COVER RH
71812C
4.REMOVE RECLINING ADJUSTER COVER LH
71148N
5.REMOVE REAR SEAT OUTER LEG COVER
71149H
6.REMOVE REAR SEAT INNER LEG COVER
79967J
7.REMOVE REAR NO. 4 SEAT LEG SIDE COVER (for 7th Row Seat with 4-Passenger Seat)
71149R
8.REMOVE REAR SEAT INNER LEG COVER (for 2-leg Type)
71148C
9.REMOVE REAR SEAT OUTER LEG COVER (for 2-leg Type)
73360B
10.DISCONNECT REAR SEAT OUTER BELT ASSEMBLY
Remove the bolt.
Detach the 2 guides and disconnect the retractor of the rear seat outer belt assembly.
73350C
11.DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
Use the same procedure as for the rear seat outer belt assembly retractor.
73343
12.REMOVE REAR SEAT SHOULDER BELT GUIDE RH
13.REMOVE NO. 2 SEAT CUSHION COVER WITH PAD
Detach the fastening tape and fold back the No. 2 seat cushion cover sub-assembly RH.
|
Fastening Tape |
Detach the 9 hooks.
for 2-leg Type 5th Row Seat:
Pull out the strap of the No. 2 seat cushion cover sub-assembly RH from the No. 1 seat leg sub-assembly RH.
Remove the No. 2 seat cushion cover with pad from the No. 1 seat leg sub-assembly RH.
73380F
14.REMOVE REAR SEAT INNER BELT ASSEMBLY
Use the same procedure as for the other rear seat inner belt assemblies.
Detach the fastening tape and open the rear seat cover.
|
Fastening Tape |
Remove the bolt.
Pull out the rear seat inner belt assembly from the hole of the rear seat cover and remove it.