Wear protective gloves. Sharp areas on the parts may injure your hands.
The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
1.REMOVE REAR NO. 1 SEAT ASSEMBLY RH
2.REMOVE SUB SEAT ASSEMBLY (w/ Sub Seat)
71811C
3.REMOVE RECLINING ADJUSTER COVER RH
71812C
4.REMOVE RECLINING ADJUSTER COVER LH
74617C
5.REMOVE ASSIST GRIP PLUG (w/ Assist Grip)
74610A
6.REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Assist Grip)
79209
7.REMOVE NO. 2 SEAT BACK BOARD SUB-ASSEMBLY (w/ Seatback Board)
73178A
8.REMOVE SEAT BELT ANCHOR COVER CAP
73179A
9.REMOVE SEAT BELT ANCHOR COVER CAP LH
Use the same procedure as for the seat belt anchor cover cap.
73373A
10.REMOVE REAR SEAT SHOULDER BELT COVER RH
73375
11.REMOVE REAR SEAT SHOULDER BELT COVER LH
Use the same procedure described for the RH side.
12.DISCONNECT REAR SEAT OUTER BELT ASSEMBLY FLOOR ANCHOR
Remove the bolt and disconnect the floor anchor of the rear seat outer belt assembly.
13.DISCONNECT REAR CENTER SEAT OUTER BELT FLOOR ANCHOR
Use the same procedure as for the rear seat outer belt assembly floor anchor.
73375M
14.REMOVE REAR SEAT SHOULDER BELT HOLE COVER (w/o Seatback Board)
73135A
15.REMOVE SHOULDER BELT ANCHOR COVER RH
73136A
16.REMOVE SHOULDER BELT ANCHOR COVER LH
Use the same procedure described for the RH side.
73373D
17.REMOVE REAR SEAT SHOULDER BELT HOLE COVER RH
73375B
18.REMOVE REAR SEAT SHOULDER BELT HOLE COVER LH
Use the same procedure described for the RH side.
73360B
19.REMOVE REAR SEAT OUTER BELT ASSEMBLY
Pull out the rear seat outer belt assembly from the hole in the No. 1 seatback cover sub-assembly RH as shown in the illustration.
w/ Seatback Board:
Pull out the rear seat outer belt assembly from the No. 1 seatback spring assembly RH as shown in the illustration.
w/o Seatback Board:
Pull out the rear seat outer belt assembly from the No. 1 seatback spring sub-assembly RH and No. 1 seatback cover sub-assembly RH as shown in the illustration.
Remove the bolt.
Detach the 2 guides and remove the rear seat outer belt assembly.
73350C
20.REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY
Use the same procedure as for the rear seat outer belt assembly.