Home › Vehicle Interior › WIPER / WASHER › WASHER MOTOR (for Rear Side)
RM2850E _58 Vehicle Interior _073209 WIPER / WASHER _0356348 WASHER MOTOR(for Rear Side) A

WIPER / WASHER  WASHER MOTOR(for Rear Side)  REMOVAL  


PROCEDURE

Hide 64735A 2.REMOVE CENTER BACK RAIL INNER GARNISH

Hide 62472D 3.REMOVE REAR PILLAR GARNISH UPPER LH

Hide 58614A 4.REMOVE NO.4 MAT SET PLATE

Hide 62512R 5.REMOVE REAR BODY INSIDE TRIM REAR LH

Hide 6.DRAIN WINDSHIELD WASHER FLUID

NOTICE:

Prepare a container before performing the procedure.


a.
B463177

Disconnect the washer hose and drain the windshield washer fluid.


Hide 85330R 7.REMOVE REAR WASHER JAR ASSEMBLY

a.
B463178

Disconnect the connector.


b.

Disconnect the washer hose from the guide.


c.

Disconnect the washer hose from the rear washer motor assembly.


d.

Remove the 3 bolts and rear washer jar assembly.

Text in Illustration
V100135

Bolt
V100136

Connector


Hide 85310R 8.REMOVE REAR WASHER MOTOR ASSEMBLY

a.
B463179

Pull in the direction indicated by the arrow shown in the illustration to remove the rear washer motor assembly.


b.

Remove the grommet.


Hide 85332D 9.REMOVE REAR WASHER TANK CAP

a.
B463180

Remove the guide and rear washer tank cap.