1. JACK UP AND SUPPRT FRAME ON STANDS
2.REMOVE FRONT WHEEL
3.REMOVE FRONT AXLE HUB
4.DISCONNECT KNUCKLE ARM
w/ Disc brake:
Remove the nut and bolt, and disconnect the knuckle arm from the steering knuckle.
w/ Drum brake:
Remove the 2 cotter pins, nuts and bolts, and disconnect the knuckle arm from the steering knuckle.
5.DISCONNECT LOWER SUSPENSION ARM FROM STEERING KNUCKLE
Support the lower arm with a jack.
Remove the cotter pin and loosen the nut.
Only loosen the nut until SST can be caught, do not remove it.
Using SST, disconnect the lower suspension arm from the steering knuckle.
Remove the lower ball joint nut.
6.DISCONNECT FRONT SHOCK ABSORBER
Remove the front shock absorber lower set bolt and nut.
Remove the jack from the lower arm.
48069
7.REMOVE LOWER SUSPENSION ARM
Place matchmarks on the front and rear adjusting cams.
Remove the nuts and adjusting cams, and remove the lower suspension arm.