1. JACK UP AND SUPPORT FRAME ON STANDS
2.REMOVE FRONT WHEEL
3.DISCONNECT STEERING KNUCKLE
Support the lower suspension arm with a jack.
Disconnect the brake hose bracket from the steering knuckle.
Remove the cotter pin from the upper ball joint.
Loosen the upper ball joint nut.
Only loosen the nut until SST can be caught, do not remove it.
Using SST, disconnect the steering knuckle.
43360
4.REMOVE UPPER BALL JOINT
Lower the lower suspension arm.
Remove the 2 nuts, bolts. and upper ball joint.
48069
5.REMOVE LOWER BALL JOINT
Remove the lower suspension arm.
Click hereSuspension>FRONT SUSPENSION>FRONT LOWER SUSPENSION ARM>REMOVAL
Disassemble the lower suspension arm.
Click hereSuspension>FRONT SUSPENSION>FRONT LOWER SUSPENSION ARM>DISASSEMBLY