Home › Engine / Hybrid System › N04C-WA (EMISSION CONTROL) › FUEL PRESSURE SENSOR › from 2019.08
RM2850E _51 Engine / Hybrid System _082614 N04C-WA EMISSION CONTROL _0402315 FUEL PRESSURE SENSOR A

N04C-WA EMISSION CONTROL  FUEL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 53712C 1.REMOVE FRONT FENDER APRON LH

Hide 89458G 4.REMOVE NO. 2 FUEL PRESSURE SENSOR

a.
A404388

Disconnect the No. 2 fuel pressure sensor connector.


b.
A404389

Using SST, remove the No. 2 fuel pressure sensor and gasket.

SST
09922-10010  

NOTICE:

Place a cloth, etc. underneath the No. 2 fuel pressure sensor to prevent fuel from spraying.