Home › Engine / Hybrid System › N04C-WA (ENGINE CONTROL) › ECM › from 2019.08
RM2850E _51 Engine / Hybrid System _082611 N04C-WA ENGINE CONTROL _0403584 ECM A

N04C-WA ENGINE CONTROL  ECM  INSTALLATION  


PROCEDURE

Hide 89667A 1.INSTALL NO. 1 ECM BRACKET

a.

Install the No. 1 ECM bracket with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 89668A 2.INSTALL NO. 2 ECM BRACKET

a.

Install the No. 2 ECM bracket with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 89661A 3.INSTALL ECM

a.

Install the ECM with the 2 bolts and nut.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Connect the 2 connectors and 2 clamps.


Hide 67676 4.INSTALL FRONT SIDE TRIM BOARD COVER LH

a.

Attach the 4 claws and 3 clips to install the front side trim board cover LH.


b.

Install the screw.


Hide 5.REGISTRATION INJECTOR COMPENSATION CODE

Hide 6.CHECK FOR INJECTOR COMPENSATION CODE