Home › Engine / Hybrid System › N04C-VL (LUBRICATION) › ENGINE OIL COOLER › from 2019.08
RM2850E _51 Engine / Hybrid System _073165 N04C-VL LUBRICATION _0356031 ENGINE OIL COOLER A

N04C-VL LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15600D 1.INSTALL OIL FILTER PLUG

a.

Apply a light coat of engine oil to 3 new O-rings, and install it to the 3 oil filter plugs.


b.

Install the 3 oil safety valve sub-assemblies and 3 oil filter compression springs to the oil cooler cover sub-assembly with the 3 oil filter plugs.

Torque:
29.4 N*m (300 kgf*cm, 22 ft.*lbf)


c.
A446925E01
0.385,0.01 0.635,0.271 0.25,0.26 10 false A 3.156,0.094 3.406,0.354 0.25,0.26 10 false A 0.042,1.083 0.292,1.344 0.25,0.26 10 false B

Apply a light coat of engine oil to 3 new O-rings, and install it to the 3 oil filter plugs.


d.

Install the 3 oil filter plugs to the oil cooler cover sub-assembly.

Torque:
A : 29.4 N*m (300 kgf*cm, 22 ft.*lbf)
B : 24.5 N*m (250 kgf*cm, 18 ft.*lbf)


Hide 15710 2.INSTALL OIL COOLER ASSEMBLY

a.

Install the oil cooler assembly with 2 new gaskets to the oil cooler cover sub-assembly with the 4 nuts.

Torque:
18.2 N*m (186 kgf*cm, 13 ft.*lbf)


Hide 3.INSTALL OIL COOLER COVER SUB-ASSEMBLY

a.
A446927C02
1.229,0.813 1.604,1.094 0.375,0.281 10 false *a
*a Oil Cooler Assembly Side


Install 4 new O-rings as shown in the illustration.


b.

Install the oil cooler cover sub-assembly to the cylinder block with the 15 bolts.

Torque:
28.5 N*m (291 kgf*cm, 21 ft.*lbf)


Hide 83530 4.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

Hide 17201 6.INSTALL TURBOCHARGER SUB-ASSEMBLY