Wear protective gloves. Sharp areas on the parts may injure your hands.
79015A
1.INSTALL NO. 1 SEAT CUSHION PAD SUB-ASSEMBLY RH (OCCUPANT DETECTION SENSOR)
When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY>PRECAUTION
Align the seam allowance in a single direction as shown in the illustration.
Set the No. 1 seat cushion cover RH to the No. 1 seat cushion pad sub-assembly RH (occupant detection sensor).
| *a | Hog Ring Pliers |
Using hog ring pliers, install the No. 1 seat cushion cover RH to the No. 1 seat cushion pad sub-assembly RH (occupant detection sensor) with 8 new hog rings in the order shown in the illustration.
Do not dirty or damage the No. 1 seat cushion cover RH.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 1 seat cushion cover RH.
| *a | Fastening Tape |
| *b | Band |
Attach the fastening tape and band.
2.INSTALL NO. 1 SEAT CUSHION COVER WITH PAD
Attach the 5 hooks and install the No. 1 seat cushion cover with pad to the seat frame.
Attach the fastening tape.
Attach the clamp and connect the connector.
3.INSTALL REAR NO. 1 SEAT ASSEMBLY RH