Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.
2nd row seats are not installed to vehicles with cooler boxes.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
79108A
1.INSTALL REAR NO. 6 SEAT LEG SUB-ASSEMBLY
for Long Body 5th Row Seat:
for Standard Body 4th Row Seat:
Install the rear No. 6 seat leg sub-assembly with the 2 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
71308G
2.INSTALL REAR SEAT LEG SUB-ASSEMBLY RH (for 2nd Row Seat)
Install the rear seat leg sub-assembly RH with the 2 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
71308F
3.INSTALL REAR SEAT LEG SUB-ASSEMBLY RH (for 1st Row Seat)
Install the rear seat leg sub-assembly RH with the 2 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
4.INSTALL SUB SEAT ASSEMBLY (w/ Sub Seat)
5.INSTALL REAR NO. 1 SEAT ASSEMBLY LH
for Long Body 4, 6th and 7th Row Seat:
for Standard Body 5th Row Seat:
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Attach the 2 hooks.
Install the rear No. 1 seat assembly LH with the 4 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
for Long Body 5th Row Seat:
for Standard Body 4th Row Seat:
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Attach the 2 hooks.
Install the rear No. 1 seat assembly LH with the 4 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
for 3rd Row Seat:
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Attach the 2 hooks.
Install the rear No. 1 seat assembly LH with the 4 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
for 1st Row Seat:
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Install the rear No. 1 seat assembly LH with the 4 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
w/ Seat Belt Warning System:
Attach the clamp and connect the connector.
for 2nd Row Seat:
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Attach the guide.
Install the rear No. 1 seat assembly LH with the 4 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
73308
6.INSTALL SUB SEAT INNER BELT SUB-ASSEMBLY (w/ Sub Seat)
62671F
7.INSTALL NO. 1 SIDE TRIM BOARD COVER RH (for LHD)
Use the same procedure described for the No. 1 side trim board cover LH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for LHD)>INSTALLATION
62516E
8.INSTALL NO. 4 SIDE TRIM BASE COVER RH (for LHD, w/ No. 4 Side Trim Base Cover RH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover LH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for LHD)>INSTALLATION
for Type B:
Use the same procedure described for the No. 1 side trim cover LH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for LHD)>INSTALLATION
62516D
9.INSTALL NO. 3 SIDE TRIM BASE COVER RH (for LHD, w/ No. 3 Side Trim Base Cover RH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover LH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for LHD)>INSTALLATION
for Type B:
Use the same procedure described for the No. 4 side trim base cover LH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for LHD)>INSTALLATION
62516B
10.INSTALL NO. 2 SIDE TRIM BASE COVER RH (for LHD)
Use the same procedure described for the No. 2 side trim base cover LH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for LHD)>INSTALLATION
62628D
11.INSTALL NO. 2 SIDE TRIM COVER RH (for LHD)
Use the same procedure described for the No. 1 side trim base cover LH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for LHD)>INSTALLATION
62672
12.INSTALL NO. 1 SIDE TRIM BOARD COVER LH (for RHD)
Use the same procedure described for the No. 1 side trim board cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62526G
13.INSTALL NO. 4 SIDE TRIM BASE COVER LH (for RHD, w/ No. 4 Side Trim Base Cover LH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
for Type B:
Use the same procedure described for the No. 5 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62526F
14.INSTALL NO. 3 SIDE TRIM BASE COVER LH (for RHD, w/ No. 3 Side Trim Base Cover LH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
for Type B:
Use the same procedure described for the No. 4 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62526D
15.INSTALL NO. 2 SIDE TRIM BASE COVER LH (for RHD)
Use the same procedure described for the No. 2 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62525D
16.INSTALL NO. 1 SIDE TRIM BASE COVER LH (for RHD)
Use the same procedure described for the No. 1 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
17.INSTALL COOLING BOX (w/ Cool Box)