Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER (for LHD) › from 2021.01
RM2850E _54 Brake _073226 BRAKE SYSTEM (OTHER) _0456401 BRAKE BOOSTER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for LHD)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Make sure to release the vacuum from the brake booster before removing the master cylinder from the brake booster.


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 55301 3.REMOVE INSTRUMENT PANEL SUB-ASSEMBLY

Hide 4.REMOVE STEERING COLUMN ASSEMBLY

Hide 55330B 5.REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY

Hide 55305C 6.REMOVE INSTRUMENT PANEL REINFORCEMENT SUB-ASSEMBLY

a.

Remove the 4 bolts and instrument panel reinforcement sub-assembly.


Hide 47201 7.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 8.DISCONNECT NO. 1 CLUTCH BOOSTER VACUUM HOSE

Hide 9.DISCONNECT CLUTCH RESERVOIR TUBE

Hide 31481K 10.REMOVE MASTER CYLINDER TO TUBE CONNECTOR TUBE

a.

Disconnect the master cylinder to tube connector tube from the clutch master cylinder assembly (Click hereDrivetrain>CLUTCH>CLUTCH MASTER CYLINDER>REMOVAL).


b.
C373997

Remove the bolt.


c.
C373998

Disconnect the clamp from the master cylinder to tube connector tube.


d.
C374000

Disconnect the master cylinder to tube connector tube from the No. 2 brake tube clamp.


e.
C373977

Detach the 2 claws and disconnect the master cylinder to tube connector tube from the No. 3 brake tube clamp.


f.

Detach the claw and disconnect the master cylinder to tube connector tube from the No. 3 brake tube clamp.


g.
C373979

Using a union nut wrench, disconnect the master cylinder to tube connector tube from the tube connector.


h.

Remove the master cylinder to tube connector tube.


Hide 11.REMOVE BRAKE TUBE

a.

Disconnect the 2 brake tubes from the No. 1 brake tube clamp.


b.

Remove the No. 1 brake tube clamp.


c.
C374001

Disconnect the 2 brake tubes from the No. 2 brake tube clamp.


d.

Remove the No. 2 brake tube clamp.


e.
C373978

Detach the 4 claws and disconnect the 2 brake tubes from the 2 No. 3 brake tube clamps.


f.

Remove the 2 bolts and the 2 No. 3 brake tube clamps.


g.
C373980

Detach the 2 claws and disconnect the 2 brake tubes from the No. 3 brake tube clamp.


h.

Remove the bolt and No. 3 brake tube clamp.


i.

Using a union nut wrench, disconnect the 2 brake tubes from the tube connector.


j.

Remove the 2 brake tubes.


Hide 12.DISCONNECT VACUUM HOSE ASSEMBLY

a.
C373993

Slide the clip and disconnect the vacuum hose assembly.


Hide 55106D 13.REMOVE PEDAL BRACKET SUB-ASSEMBLY

a.

Disconnect the clamp from the pedal bracket sub-assembly.


b.
C373982

Remove the 5 bolts, 2 nuts and pedal bracket sub-assembly.


Hide 44610 14.REMOVE BRAKE BOOSTER ASSEMBLY

C373994

a.

Remove the clip and push rod pin.


b.

Remove the 4 nuts and brake booster assembly.


Hide 47264D 15.REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.

Loosen the lock nut, remove the master cylinder push rod clevis and lock nut.