A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
62451C
1.INSTALL REAR ROOF SIDE RAIL GARNISH RH (w/o Rear Air Duct)
for Standard Body:
Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>INSTALLATION
for Long Body:
Attach the 3 clips to install the rear roof side rail garnish RH.
62431F
2.INSTALL ROOF SIDE RAIL GARNISH (for Long Body , w/o Rear Air Duct)
Attach the 2 claws and 7 clips to install the roof side rail garnish.
62451E
3.INSTALL REAR ROOF SIDE RAIL GARNISH (w/o Rear Air Duct)
Attach the 2 claws and 7 clips to install the rear roof side rail garnish.
62451B
4.INSTALL NO. 3 ROOF SIDE RAIL GARNISH RH (w/o Rear Air Duct)
Attach the 2 claws and 7 clips to install the No. 3 roof side rail garnish RH.
63375B
5.INSTALL NO. 1 ROOF HEADLINING MOULDING RH (w/o Rear Air Duct)
63377C
6.INSTALL NO. 2 ROOF HEADLINING MOULDING (w/o Rear Air Duct)
62530A
7.INSTALL NO. 2 SIDE TRIM ASSEMBLY RH
Attach the 7 clips to install the No. 2 side trim assembly RH.
Install the 4 clips.
62550E
8.INSTALL NO. 3 SIDE TRIM ASSEMBLY RH
62570C
9.INSTALL NO. 4 SIDE TRIM ASSEMBLY (for Long Body)
62612C
10.INSTALL NO. 2 SIDE TRIM BOARD RH
Use the same procedure described for the LH side.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62613C
11.INSTALL NO. 3 SIDE TRIM BOARD RH
62614C
12.INSTALL NO. 4 SIDE TRIM BOARD RH
62615C
13.INSTALL NO. 5 SIDE TRIM BOARD RH
62538B
14.INSTALL NO. 4 PILLAR GARNISH RH
62539B
15.INSTALL NO. 5 PILLAR GARNISH RH (for Long Body)
62638A
16.INSTALL QUARTER PILLAR GARNISH RH
Attach the 6 clips and 2 claws to install the quarter pillar garnish RH.
74730
17.INSTALL HAND GRIP FRAME ASSEMBLY (w/ Hand Grip Frame)
Install the hand grip frame assembly with the 8 bolts.
62425
18.INSTALL CENTER PILLAR GARNISH COVER (w/ Hand Grip Frame)
62510L
19.INSTALL NO. 1 SIDE TRIM ASSEMBLY
Attach the 2 guides.
Attach the 13 clips to install the No. 1 side trim assembly.
62530C
20.INSTALL NO. 2 SIDE TRIM ASSEMBLY
Attach the 9 clips to install the No. 2 side trim assembly.
67675
21.INSTALL FRONT SIDE TRIM BOARD COVER RH
Attach the 3 clips and 4 claws to install the front side trim board cover RH.
Install the screw.
62537B
22.INSTALL NO. 3 PILLAR GARNISH RH
73210
23.CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
Use the same procedure described for the LH side.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
73223B
24.INSTALL FRONT SEAT BELT RETRACTOR COVER RH
Use the same procedure described for the LH side.
62639A
25.INSTALL QUARTER PILLAR GARNISH LH
Attach the 2 claws and 6 clips to install the quarter pillar garnish LH.
62989
26.INSTALL CENTER DOOR LOCK COVER
Attach the 8 clips to install the center door lock cover.
62211
27.INSTALL FRONT PILLAR GARNISH RH
62452C
28.INSTALL REAR ROOF SIDE RAIL GARNISH LH (w/o Rear Air Duct)
Attach the 7 clips to install the rear roof side rail garnish LH.
62451E
29.INSTALL REAR ROOF SIDE RAIL GARNISH (w/o Rear Air Duct)
Attach the 7 clips and 2 claws to install the rear roof side rail garnish.
62431F
30.INSTALL ROOF SIDE RAIL GARNISH (for Long Body, w/o Rear Air Duct)
Attach the 7 clips and 2 claws to install the roof side rail garnish.
62452B
31.INSTALL NO. 3 ROOF SIDE RAIL GARNISH LH (w/o Rear Air Duct)
for Standard Body:
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
for Long Body:
Attach the 3 clips and 2 claws to install the No. 3 roof side rail garnish LH.
63378C
32.INSTALL NO. 3 ROOF HEADLINING MOULDING (w/o Rear Air Duct)
Use the same procedure to install the No. 2 roof headlining moulding.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
63375D
33.INSTALL ROOF HEADLINING MOULDING (w/o Rear Air Duct)
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62570C
34.INSTALL NO. 4 SIDE TRIM ASSEMBLY (for Long Body)
62560B
35.INSTALL NO. 3 SIDE TRIM ASSEMBLY LH
62625C
36.INSTALL NO. 5 SIDE TRIM BOARD LH
62624C
37.INSTALL NO. 4 SIDE TRIM BOARD LH
62511R
38.INSTALL REAR BODY REAR INSIDE TRIM RH
62512R
39.INSTALL REAR BODY REAR INSIDE TRIM LH
62227
40.INSTALL QUARTER PILLAR COVER RH
62228
41.INSTALL LOWER QUARTER PILLAR COVER LH
62471D
42.INSTALL REAR UPPER PILLAR GARNISH RH
62472D
43.INSTALL REAR UPPER PILLAR GARNISH LH
Use the same procedure described for the RH side
62487A
44.INSTALL INNER ROOF SIDE GARNISH COVER RH (for Double Swing Out Type)
62488A
45.INSTALL INNER ROOF SIDE GARNISH COVER LH (for Double Swing Out Type)
Use the same procedure described for the RH side.
64735A
46.INSTALL CENTER BACK INNER RAIL GARNISH (for Lift Up Type)
58614A
47.INSTALL NO. 4 MAT SET PLATE
62540A
48.INSTALL NO. 2 SIDE TRIM ASSEMBLY LH
62520G
49.INSTALL NO. 1 SIDE TRIM ASSEMBLY LH
Attach the 7 clips to install the No. 1 side trim assembly LH.
Install the 4 clips.
62623C
50.INSTALL NO. 3 SIDE TRIM BOARD LH
62622C
51.INSTALL NO. 2 SIDE TRIM BOARD LH
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62621C
52.INSTALL NO. 1 SIDE TRIM BOARD LH
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62549B
53.INSTALL NO. 5 PILLAR GARNISH LH (for Long Body)
62548B
54.INSTALL NO. 4 PILLAR GARNISH LH
62547B
55.INSTALL NO. 3 PILLAR GARNISH LH
61890A
56.INSTALL BACK WINDOW GLASS HAMMER ASSEMBLY (w/ Hammer)
63951
57.INSTALL COOLER PIPE COVER
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>INSTALLATION
62414A
58.INSTALL LOWER CENTER PILLAR GARNISH LH
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>INSTALLATION
73220
59.CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>INSTALLATION
73233
60.INSTALL LAP BELT OUTER ANCHOR COVER
Use the same procedure described for the RH side.
Click hereVehicle Interior>SEAT BELT>FRONT SEAT OUTER BELT ASSEMBLY (for Driver Seat)>INSTALLATION
62312C
61.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>INSTALLATION
58651A
62.INSTALL FRONT DOOR NO. 1 MAT PLATE
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>INSTALLATION
46243
63.INSTALL PARKING BRAKE LEVER COVER
Use the same procedure described for the RH side.
Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>INSTALLATION
64.INSTALL FRONT SEAT ASSEMBLY
66301D
65.INSTALL ROPE HOOK SUB-ASSEMBLY (w/ Rope Hook)
Use the same procedure for all rope hook sub-assemblies and rope hook bands.
Install the rope hook sub-assembly and rope hook band with the 2 bolts.
66.INSTALL REAR NO. 8 SEAT ASSEMBLY (for 4-Passenger Seat)
for Tumble Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for Tumble Type 4-Passenger Seat)>INSTALLATION
for Fixed Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for Fixed Type 4-Passenger Seat)>INSTALLATION
67.INSTALL REAR SEAT ASSEMBLY RH
for Single-Passenger Seat with 3 Point Type Seat Belt:
for Single-Passenger Seat without 3 Point Type Seat Belt:
68.INSTALL REAR SEAT ASSEMBLY LH
for 2-Passenger Seat with Separate Type Seatback:
for 2-Passenger Seat with Bench Type Seatback:
62516C
69.INSTALL NO. 1 SIDE TRIM BASE COVER LH
except Type B:
Attach the clip and 4 claws to install the No. 1 side trim base cover LH.
for Type B:
Attach the clip and 2 claws to install the No. 1 side trim base cover LH.
62627F
70.INSTALL NO. 1 SIDE TRIM COVER LH (for Type B)
Temporarily install the No. 1 side trim cover LH in the direction indicated by the arrow in the illustration.
Attach the 2 claws to install the No. 1 side trim cover LH.
62526D
71.INSTALL NO. 2 SIDE TRIM BASE COVER LH
Attach the 5 claws and clip to install the No. 2 side trim base cover LH.
Use the same procedure for all No. 2 side trim base cover LH.
62526F
72.INSTALL NO. 3 SIDE TRIM BASE COVER LH (w/ No. 3 Side Trim Base Cover LH)
Use the same procedure described for the No. 2 side trim base cover LH.
62526G
73.INSTALL NO. 4 SIDE TRIM BASE COVER LH (w/ No. 4 Side Trim Base Cover LH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover LH.
for Type B:
Attach the 3 claws and clip to install the No. 4 side trim base cover LH.
62526H
74.INSTALL NO. 5 SIDE TRIM BASE COVER LH (w/ No.5 Side Trim Base Cover LH)
Use the same procedure described for the No. 2 side trim base cover LH.
62526J
75.INSTALL NO. 6 SIDE TRIM BASE COVER LH (w/ No. 6 Side Trim Base Cover LH)
Use the same procedure described for the No. 2 side trim base cover LH.
62672
76.INSTALL NO. 1 SIDE TRIM BOARD COVER LH
w/ Luggage Compartment:
Attach the 2 claws and clip to install the No. 1 side trim board cover LH.
w/o Luggage Compartment:
Attach the 5 claws and clip to install the No. 1 side trim board cover LH.
62628D
77.INSTALL NO. 2 SIDE TRIM COVER RH
Use the same procedure described for the No. 1 side trim base cover LH.
62516B
78.INSTALL NO. 2 SIDE TRIM BASE COVER RH
Use the same procedure described for the No. 2 side trim base cover LH.
62516D
79.INSTALL NO. 3 SIDE TRIM BASE COVER RH (w/ No. 3 Side Trim Base Cover RH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover LH.
for Type B:
Use the same procedure described for the No. 4 side trim base cover LH.
62516E
80.INSTALL NO. 4 SIDE TRIM BASE COVER RH (w/ No. 4 Side Trim Base Cover RH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover LH.
for Type B
Use the same procedure described for the No. 1 side trim cover LH.
62671F
81.INSTALL NO. 1 SIDE TRIM BOARD COVER RH
Use the same procedure described for the No. 1 side trim board cover LH.
89910
82.INSTALL COOLER BOX ASSEMBLY (w/ Cooler Box)
83.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL