Home › Engine / Hybrid System › N04C-VJ (LUBRICATION) › OIL LEVEL SENSOR › from 2021.01
RM2850E _51 Engine / Hybrid System _096893 N04C-VJ LUBRICATION _0461233 OIL LEVEL SENSOR A

N04C-VJ LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Install the engine oil level sensor with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the engine oil level sensor connector.


Hide 58734B 4.INSTALL REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58410 5.INSTALL ENGINE SERVICE HOLE COVER

Hide 51441D 6.INSTALL NO. 1 ENGINE UNDER COVER