Home › Engine / Hybrid System › N04C-VJ (FUEL) › FUEL ADDITION CUT VALVE ASSEMBLY › from 2021.01
RM2850E _51 Engine / Hybrid System _096891 N04C-VJ FUEL _0461611 FUEL ADDITION CUT VALVE ASSEMBLY A

N04C-VJ FUEL  FUEL ADDITION CUT VALVE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 22214B 1.INSTALL FUEL ADDITION CUT VALVE ASSEMBLY

a.

Install the fuel addition cut valve assembly with the 2 bolts.

Torque:
28.5 N*m (291 kgf*cm, 21 ft.*lbf)


b.

Connect the fuel filter to injection pump fuel pipe sub-assembly, No. 1 fuel pipe and 2 new gaskets with the 2 union bolts.

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)

NOTICE:

Be sure to prevent foreign matter or water from entering the lines.



c.

Connect the fuel addition cut valve assembly connector.


Hide 58734B 5.INSTALL REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58410 6.INSTALL ENGINE SERVICE HOLE COVER