Home › Vehicle Interior › METER / GAUGE / DISPLAY › TACHOGRAPH › from 2021.01
RM2850E _58 Vehicle Interior _073141 METER / GAUGE / DISPLAY _0355897 TACHOGRAPH A

METER / GAUGE / DISPLAY  TACHOGRAPH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for RHD vehicles.



PROCEDURE

Hide 1.INSTALL NO. 1 TACHOGRAPH BRACKET

a.
B554320

Install the No. 1 tachograph bracket with the 2 screws.


Hide 2.INSTALL NO. 2 TACHOGRAPH BRACKET

a.
B554319

Install the No. 2 tachograph bracket with the 2 screws.


Hide 83210 3.INSTALL TACHOGRAPH ASSEMBLY

a.

Install the tachograph assembly with the 4 screws.


Hide 55601C 4.INSTALL INSTRUMENT PANEL UNDER TRAY SUB-ASSEMBLY

Hide 55470 5.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

Hide 55412D 6.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL

Hide 86250 7.INSTALL AMPLIFIER MICROPHONE ASSEMBLY (w/ Microphone)

Hide 55433B 8.INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

Hide 58841A 9.INSTALL SHIFTING HOLE COVER (for Automatic Transmission)

Hide 58848A 10.INSTALL SHIFT LEVER HOLE COVER (for Manual Transmission)

Hide 58286 11.INSTALL NO. 1 SHIFT AND SELECT LEVER BOOT (for Manual Transmission)

Hide 58534A 12.INSTALL TRANSMISSION COVER MAT (for Manual Transmission)

a.

Install the transmission cover mat to the shift and select lever support.


Hide 33504F 13.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

a.

Gently rotate the shift lever knob sub-assembly by hand until it locks.


b.

After locking, further tighten by 1.5 turns.


c.

After tightening, rotate and adjust the tightened direction so that the shift pattern is positioned within +/-10° of the front of the vehicle.